Dstrac axles final thoughts

[911turboz]

Anybody have part numbers for ball joints, rotors, pads, etc for these axles?

Rear Calipers and pads are 18-B4790 at Rock Auto. B4790 at O'Reilly will cross ref as well
Front pads are 2015 FJ Cruiser/ Tacoma and you may have to shave slightly - I'm told that they are 0EX976 or OEX976 but please do some research as I have not confirmed this yet
Pinion Seal is 9316
Pinion Nut is 7/8-14 - Yukon YSPPN-010
Axle seals are 95-10-70
29 spline Dana 70 Ring and pinion
Change your vent barb to 1/8 MIB to 5/16 to increase the venting
1550 fron stub shaft u joints
dont know on ball joints still.... anybody?

Sponsored

 

[Pearl_JLUR]

Rear Calipers and pads are 18-B4790 at Rock Auto. B4790 at O'Reilly will cross ref as well
Front pads are 2015 FJ Cruiser/ Tacoma and you may have to shave slightly - I'm told that they are 0EX976 or OEX976 but please do some research as I have not confirmed this yet
Pinion Seal is 9316
Pinion Nut is 7/8-14 - Yukon YSPPN-010
Axle seals are 95-10-70
29 spline Dana 70 Ring and pinion
Change your vent barb to 1/8 MIB to 5/16 to increase the venting
1550 fron stub shaft u joints
dont know on ball joints still.... anybody?

Ball joints - DRIVEWAY JE5354 this is what I was told the ball joints were. I’m trying to get a parts diagram from them right now.

do you have a PN you use for the Ujoint? Think I need to replace Ujoint and wheel bearing…

 

[Ney Kerestegian]

I am getting a good deal for a set of JK DS76, I was wondering if there are any differences with the JLUR? Abs sensor, brackets, etc..?? Brackets don't come fully welded so they can be moved arround.

 

[XtremeRetard]

Well on the plus side Fusion don't give you a parts list either. Though there is info on the FB page... kind of..

 

[Spazman1044]

Any new updates or any kind of new contact information available?

I have the Ds76 front and rear and need parts.

Sponsored