Allen0jason
Well-Known Member
- Thread starter
- #1
Subject: jlu with upgraded Alpine sound system.
Problem: the Alpine sound system has two sound profiles, one with the hardtop on, one with the hardtop off. The change in sound profiles is triggered by the connection of the hardtop connection coupler, and can be tricked to think the hardtop is connected by a 10 amp fuse placed in the coupler as seen in the picture below. Unfortunately for the Jeeps that did not come with a hardtop the fuse trick is not available. Does anybody have an idea how to do something similar or where to look in order to make the same thing happen.
Problem: the Alpine sound system has two sound profiles, one with the hardtop on, one with the hardtop off. The change in sound profiles is triggered by the connection of the hardtop connection coupler, and can be tricked to think the hardtop is connected by a 10 amp fuse placed in the coupler as seen in the picture below. Unfortunately for the Jeeps that did not come with a hardtop the fuse trick is not available. Does anybody have an idea how to do something similar or where to look in order to make the same thing happen.
Sponsored