Adding electronic sway bar disconnect

[CaJLMetalHead]

I would like to know what frame pieces and bolts are needed to bolt the Rubicon sway bar in. If there is a schematic, I wonder what I would search for online?

Do you mean to a Sport?.. if that is the case.. it simply replaces the basic sway bar..
same mounting points and brackets.. just remove stock and install electronic

Sponsored

 

[Odyssey USA]

Do you mean to a Sport?.. if that is the case.. it simply replaces the basic sway bar..
same mounting points and brackets.. just remove stock and install electronic

I see there are, essentially, rubber motor mounts and I don’t recall seeing the bracket for one rubber isolator to slip over when I installed my winch/bumper.

 

[CaJLMetalHead]

here are detailed images of the suspension and steering components... You will find images of the sway bar towards the bottom of the post

https://[Banned Site]/showthread.ph...ok-at-Suspension-Steering-Components-amp-MORE!

 

[CaJLMetalHead]

I see there are, essentially, rubber motor mounts and I don’t recall seeing the bracket for one rubber isolator to slip over when I installed my winch/bumper.

Ohh ok.. I get what you are saying.. on the passenger side correct?.. when I bought my used electronic sway bar disconnect it came with the brackets ...

MOPAR makes one, but at $62 .. what are they smoking?

https://www.quadratec.com/p/mopar/p...PZDAnEnhRQVATf9oiRzIV1IrjkFw-GhIaAqn0EALw_wcB

 

[Odyssey USA]

here are detailed images of the suspension and steering components... You will find images of the sway bar towards the bottom of the post

https://[Banned Site]/showthread.ph...ok-at-Suspension-Steering-Components-amp-MORE!

I can’t get the link to work or I would check it out.

 

[CaJLMetalHead]

I can’t get the link to work or I would check it out.

ohh ok.. google Mopar Part #: 68260703AA

 

[Odyssey USA]

ohh ok.. google Mopar Part #: 68260703AA

I saw the bracket just not any posts or images of a sway bar below them. Says “banned site” in the link you shared.

 

[CaJLMetalHead]

 

[iboostgti335]

Did figuring out this mod ever get any traction?

 

[CaJLMetalHead]

Did figuring out this mod ever get any traction?

Nothing yet although I have not forgotten about this project.. I have just been busy working on other Jeep stuff..

Before I can work on it I need to build a new CANBus sniffer that allows me to determine what signals are being sent when you press the sway bar disconnect button on a Rubicon ( I have a CANBus sniffer but is dying unfortunately and the software is way too basic.. ugh )

Another issue is that I don't know anybody nearby in Northern California who is willing to allow
me to hack into their rig..

 

[musicguyusa]

I found this a while ago while searching for something else. I do not know if it will be of any assistance to anyone....but here goes. It isn't an electronic sway bar disconnect; it is a pneumatic sway bar disconnect using an ARB compressor.

https://teamtechoffroad.com/collections/sway-bar-kits

 

[Stevenalton3]

[Banned Site] made a video putting a Jk electric sway bar on his JL. Doesn’t do any wiring and uses an evo no limits. Hella lot easier than disconnect with quick disconnects. Probably route I’m gonna go

 

[Stevenalton3]

way-a-life. Idk why it’s banned lol

 

[U EEDIOT]

way-a-life. Idk why it’s banned lol

Cause that guy is a dick.

Nice Stealth.?
I had a '92 and '99 3000GT VR-4

 

[Stevenalton3]

Cause that guy is a dick.

Nice Stealth.?
I had a '92 and '99 3000GT VR-4

Haha thanks man!

Sponsored