3.0 MODS - Show em off

[2020 Diesel JL]

Checked it out this morning and it appears that Wranglers are not included in the list of vehicles subject to the 0% for 84 months.

I will see what I can find out. I was to buy today to make a call. I don't even have time to die from the coronavirus. Everyone is shutting down there cranes and wants them repaired and serviced during the down time. CRAZY

Sponsored

 

[rcliff1]

Had it for two weeks. Got the front covered with xpel clear bra and whole jeep ceramic coated, windows ceramic tinted, short antenna, hood shocks, diesel badge and named (girlfriends jeep).
Have front bumper and lights to be installed when I have some time.

 

[kosinar]

Had it for two weeks. Got the front covered with xpel clear bra and whole jeep ceramic coated, windows ceramic tinted, short antenna, hood shocks, diesel badge and named (girlfriends jeep).
Have front bumper and lights to be installed when I have some time.

It looks amazing. Did you have it done by someone, or you did it yourself? How much are shops charging for it?

 

[rcliff1]

It looks amazing. Did you have it done by someone, or you did it yourself? How much are shops charging for it?

Full front clear bra, lifetime ceramic coating and tint was done by a shop, 3K.
I don't have that kind of patience.....lol

 

[kosinar]

Full front clear bra, lifetime ceramic coating and tint was done by a shop, 3K.
I don't have that kind of patience.....lol

Well. Quality is not cheap.

 

[Cwu21]

Full front clear bra, lifetime ceramic coating and tint was done by a shop, 3K.
I don't have that kind of patience.....lol

Looks Great I plan on doing a ceramic coating Too hopefully one of my first mods

 

[simsf1]

Any help would be greatly appreciated. Tried to install a Warn Xeon 10-S today with the Warn 101255 Winch Mount, and my installer is saying the bracket holes are not lining up correctly. Has anyone mounted a winch? He called his Warn rep and he had no information. Thanks!

 

[simsf1]

Any help would be greatly appreciated. Tried to install a Warn Xeon 10-S today with the Warn 101255 Winch Mount, and my installer is saying the bracket holes are not lining up correctly. Has anyone mounted a winch? He called his Warn rep and he had no information. Thanks!

Just found Gonzanc's post about install with the same parts. Not sure what's going on. Need to dig deeper.

 

[Gonzanc]

Just found Gonzanc's post about install with the same parts. Not sure what's going on. Need to dig deeper.

Sending you a PM

 

[GtX]

Looks like the Voswitch will fit right over the fuse box.

 

[EcoDRubi]

2.5 coil spacer lift. 37 PATS RSE Steps Arcus bumper Warn 12EVO-S it lives at the dealer as of now. 5% windows

 

[2020 Diesel JL]

Had it for two weeks. Got the front covered with xpel clear bra and whole jeep ceramic coated, windows ceramic tinted, short antenna, hood shocks, diesel badge and named (girlfriends jeep).
Have front bumper and lights to be installed when I have some time.

Who makes the short antenna, looks good?

 

[JLURD]

Any help would be greatly appreciated. Tried to install a Warn Xeon 10-S today with the Warn 101255 Winch Mount, and my installer is saying the bracket holes are not lining up correctly. Has anyone mounted a winch? He called his Warn rep and he had no information. Thanks!

I have installed, uninstalled and reinstalled that same winch and bracket from an ‘18 JLUR 3.6 to ‘20 JLUR 3.0. It is a pain in the ass every time. Incredibly tight spaces for the inner frame bolts from the bumper with that wide of a winch. So much so I had to grind the flange of one of those 4 flange nuts to clear the zeon 10s the second go around. The plate itself does take some adjusting to line everything up. Seems like it won’t clear the swaybar disconnect at first but barely does. If you’re using the mopar steel skid plate under it, that often needs to be reamed out a bit to match the mounting holes as well. Looks great when it’s done but it comes at a cost...more on that in my next post...

 

[JLURD]

Alright folks, this won’t be the last hair-raising project on my 3.0, but it might have been the most. The idea of drilling 8 holes through a $4500 painted roof for my @Maximus-3 rhino rack mount had me fairly concerned since picking up the rig a few weeks ago. There is a steep monetary and time-invested price to pay for a 900+ lb load rating that looks this clean, but it’s absolutely worth it. Between the pioneer platform assembly, satellite antenna relocation, bracket alignment, drilling, mounting, and roll bar reassembly, this is a two day project especially if you’re the type of person who adjusts down to 1/32nd” tolerances as I tend to. It also requires at least one other reasonably strong person for a few steps. If anyone is planning on taking the plunge with this thing, do PM me, because I devised a drilling alignment method that’s significantly more fool-proof than the directions and will save you time by measuring less.

 

[Azbigbear]

Alright folks, this won’t be the last hair-raising project on my 3.0, but it might have been the most. The idea of drilling 8 holes through a $4500 painted roof for my @Maximus-3 rhino rack mount had me fairly concerned since picking up the rig a few weeks ago. There is a steep monetary and time-invested price to pay for a 900+ lb load rating that looks this clean, but it’s absolutely worth it. Between the pioneer platform assembly, satellite antenna relocation, bracket alignment, drilling, mounting, and roll bar reassembly, this is a two day project especially if you’re the type of person who adjusts down to 1/32nd” tolerances as I tend to. It also requires at least one other reasonably strong person for a few steps. If anyone is planning on taking the plunge with this thing, do PM me, because I devised a drilling alignment method that’s significantly more fool-proof than the directions and will save you time by measuring less.

What is the total height it adds? Rhino-rack with pioneer platform standard feel adds 3.5 in, quick disconnect feet adds 4.8 in. Stopped looking at Maximus since it complicates removal of hard top, but maybe need to reconsider. Looks great.

Sponsored