MOPAR LED FACTORY UPGRADE KIT

[mallratt]

Where did you order these from? Everywhere I have looked they appear to be on backorder

I ordered mine from a dealership in New Jersey on 6/19 via eBay. I’m in San Diego and got them on the 24th. Same day installation.

Sponsored

 

[mallratt]

Have your dealer call the dealer that I went to so they could get those halo lights to work
The name of the tech is Carlos and the service writer name was Mario
The dealer that I went to is in San Diego ca
And is Kearny Mesa Jeep and like said before when they flashed the BCM my halos weren’t working and told them and they re did the configuration again and after that the halos worked

Hey that’s the dealership I go to! That’s nice to know they’ve already had experience.

 

[StingGrayJL77]

@StingGrayJL77

All I did was take my instruction packet (from the kit) with me to the dealership and showed them the sales code "LPX" is the code btw (on page 2) to flash to the BCM, along with the "Restore Vehicle Configuration" directions on page 16 to do afterwards.

Hope that helps! I left the instruction packet in my Jeep for them to reference back to just in case they played stupid like they had no clue what I was talking about and I'm glad I did because I could see they used it haha.

So I’m at the dealer now and they cannot find Sales Code LPX as an option under my VIN (2019 JL Rubicon)... so they are on the phone with Chrysler to see what they can figure out... this is super frustrating!

 

[StingGrayJL77]

So I’m at the dealer now and they cannot find Sales Code LPX as an option under my VIN (2019 JL Rubicon)... so they are on the phone with Chrysler to see what they can figure out... this is super frustrating!

Well, according to Chrysler, there was a change on the Headlights for 2019, and this Sales Code will not work for the 2019’s as this kit is technically not compatible... It seems my only option will be to find an alternate 12v source for the Halo’s... which means probably tying them into the DRL’s. VERY DISAPPOINTED.

 

[l.a.j.o.i.e]

So I’m at the dealer now and they cannot find Sales Code LPX as an option under my VIN (2019 JL Rubicon)... so they are on the phone with Chrysler to see what they can figure out... this is super frustrating!

Lord Jesus, these people sound incompetent......

The instructions say to have them add the sales code to your vin, as a "Dealer Added Option". Of course they won't find it under your vin (right now).......because it hasn't been added yet. ......bruh

I'd try a different dealership, this is crazy. You know it's possible because quite a few of us have walked in and had it done already.

 

[l.a.j.o.i.e]

There ya go, wish ya luck man, it shouldn't be this hard for you

Line 3......"Confirm the new sales code has been successfully added to the VIN"

I don't quite buy their line of bs....

 

[StingGrayJL77]

There ya go, wish ya luck man, it shouldn't be this hard for you

Line 3......"Confirm the new sales code has been successfully added to the VIN"

I don't quite buy their line of bs....

Was your Jeep a 2019? They are saying it’s because mine is a 2019, and there was a headlight change, therefore that Sales Code is not available to add to it... Below are the only codes in the system that were available to add

 

[l.a.j.o.i.e]

Was your Jeep a 2019? They are saying it’s because mine is a 2019, and there was a headlight change, therefore that Sales Code is not available to add to it... Below are the only codes in the system that were available to add

My JL is an 18', but when it comes to compatibility for the code, a piece of software, I don't buy that. Maybe a tazer would help you, but I'd check out a different dealer. My Jeep dealer said they've added this kit to a few of the new Gladiators......and those are 2020's.....so something doesn't smell right lol.

 

[StingGrayJL77]

My JL is an 18', but when it comes to compatibility for the code, a piece of software, I don't buy that. Maybe a tazer would help you, but I'd check out a different dealer. My Jeep dealer said they've added this kit to a few of the new Gladiators......and those are 2020's.....so something doesn't smell right lol.

Yeah, I’m going to check with another dealer as well, just to see what they say... I have a Tazer, but it’s not able to activate the Halo’s, even with the Halo-On function selected. I’ll update the thread. It’s been an ordeal for sure.

 

[Alasek]

Hey that’s the dealership I go to! That’s nice to know they’ve already had experience.

Yeah dude Mario was very helpful at Kearny Mesa when it came down to that problem

 

[jjiswhoiam]

I received my lights today, installed them, and took them to the dealer to program. They had trouble finding the sales codes, but were able to do it. They look sweet!

 

[Alasek]

I received my lights today, installed them, and took them to the dealer to program. They had trouble finding the sales codes, but were able to do it. They look sweet!

I like the side markers bro
Where did you get those

 

[jjiswhoiam]

I like the side markers bro
Where did you get those

Thank you. They are also Mopar. I found these used in eBay for 250. The were plug and play in terms of the wiring. Dealer still had to flash them though.

 

[Alasek]

Thank you. They are also Mopar. I found these used in eBay for 250. The were plug and play in terms of the wiring. Dealer still had to flash them though.

Were they set up that way when you bought them or that’s how they all are
Like if you buy them brand new you don’t have to re wire those to the BCM

 

[jjiswhoiam]

Were they set up that way when you bought them or that’s how they all are
Like if you buy them brand new you don’t have to re wire those to the BCM

I didn’t have to wire anything for the sidemarkers I to the BCM like I did the headlights. My Jeep had the drl already, so the harness was the same. They work fine after the dealer flashed all of the LED lights.

Sponsored