What did you do TO your Jeep JL today?

[Patsloft]

I gave jeepy some TLC and a bath after a long adventure! I also finished my video of me and jeepy exploring/overlanding Idaho for nearly a month! It was our 1st adventure together but far from our last Montana is next!

Cool but your color filter is way to orange

Sponsored

 

[Goblue]

Made a custom version of our Pioneer series front and rear bumper in clear anodized 7050 T-74 aluminum:

<ROAM JL Pioneer Front Bumper in clear anodized 7050 T-74 aluminum pictured.>

<Please excuse the side steps and the spare tire, the stainless steel side steps do not yet have the weld heat tint/coloration polished off just yet and the spare tire isn't the same size as the rest of the tires. Also missing the aux LED lights on the rear bumper. Will update with better pictures after EJS 2019.>

<The ROAM JL Pioneer Rear Bumper MK1 also includes a Spare Tire Relocation Bracket for compatibility with larger tire sizes.>

awesome what size tires are those and lift

 

[American Jeeper]

You didn’t mention the Epic Road Family YouTube channel.
Some cool Canadian family of 4 running around North America and New Zealand in an RV and a Jeep JK, for the last 2-3 years!!
Ok it is not a JL...

There are some other good ones too. There may be a part 2, never know!

 

[richsteele]

Installed my Roam step/sliders. Had to wait quite a while before they finally came out with the 2dr version.

Those look really good. How was the install? Did you go with the frame or body mount version?

 

[obwahn]

Those look really good. How was the install? Did you go with the frame or body mount version?

Thanks! Frame install. It was pretty straight forward. They tell you to torque everything as you install but then the middle bracket wouldn't bolt to the step. Had to loosen everything up. They also don't provide ANY torque specs. Still waiting to hear on that.

 

[snowren24]

swapped to spline drive lugs and switched back to a 21" antenna X from a Rydonair amazon cheapy that faded in just a few months.

 

[InvertedLogic]

swapped to spline drive lugs and switched back to a 21" antenna X from a Rydonair amazon cheapy that faded in just a few months.

Are those the Borahs?

 

[snowren24]

Are those the Borahs?

Yes sir they are. I contacted AEV and asked them about the wheels and they said they would be fine on a JL Rubicon but did not recommend them on a Sahara or Sport.

I will say that the center hub opening is a bit tight on the spare tire camera but other than that they are great.

 

[Magnetdragon]

Finally took the time to get my storage/sleeping platform put back in after bedlining it. Removed the bigger portion of my rear seat and used the goosegear 60% delete bracket to keep my other seat. I can fit a good amount of recovery gear, tools, and camping stuff under the rear portion and a lot of storage in the front with a lock pad so I can keep it locked with the doors off.

Bolted down into place with aluminum brackets to factory bolt locations. Little under $250 with the aluminum corner brackets, goosegear seat bracket, herculiner, and plywood/wood.

Cheaper than the whole goosegear set up and I have a lockable storage area now too.

 

[InvertedLogic]

but did not recommend them on a Sahara or Sport.

Interesting. Did they give a reason for that?

 

[James_a]

Finally took the time to get my storage/sleeping platform put back in after bedlining it. Removed the bigger portion of my rear seat and used the goosegear 60% delete bracket to keep my other seat. I can fit a good amount of recovery gear, tools, and camping stuff under the rear portion and a lot of storage in the front with a lock pad so I can keep it locked with the doors off.

Bolted down into place with aluminum brackets to factory bolt locations. Little under $250 with the aluminum corner brackets, goosegear seat bracket, herculiner, and plywood/wood.

Cheaper than the whole goosegear set up and I have a lockable storage area now too.

Off topic. How do you like driving with the Gobi Rack and the top off?

 

[snowren24]

Interesting. Did they give a reason for that?

-They said that the offset would create issues with the fenders on on the Sahara and Sport as the wheels sit out a little further. I'm assuming when flexing they would hit the fender but the high Rubicon ones would be out of the way. .

 

[Magnetdragon]

Off topic. How do you like driving with the Gobi Rack and the top off?

Only been driving it for a day a couple of miles to work... It's about the same as having the top off normally

 

[Fire Burns]

Anti Road Rage Adapter

Your complete and blatent disregard for even trying to put this on straight and centered is messing with my OCD!

 

[Fastmover]

Thanks! Frame install. It was pretty straight forward. They tell you to torque everything as you install but then the middle bracket wouldn't bolt to the step. Had to loosen everything up. They also don't provide ANY torque specs. Still waiting to hear on that.

Roam replied with the torque specs on the 2 door install thread. You may have already seen that by now.

Sponsored