What did you do TO your Jeep JL today?

[Northeastbst]

Put on the soft tops!

What's better than one kickass Jeep?!

...two of them!!

Nice rigs!!!

Sponsored

 

[Northeastbst]

Hate to send you to this topic, its getting very long and sometimes heated.

https://www.jlwranglerforums.com/forum/threads/question-regarding-the-windsheld-defrost.15276/

@Rhinebeck01 might be able to help narrow down the exact post again. The gist is the defrost blows 99% out the middle of the vents on top of the dash. Try it, you'll see the vents in front of the driver or passenger don't get any air. On heavy defrost days, the inside window never seemed to clear. Also we had a wet snow event, and my wiper kept leaving a line of snow on the edge of window and the wipers were getting snow covered very quickly. Added the plugs (a solution found in the thread over a couple ideas), and defrost works like a champ now. The air is more evenly distributed across the vents/window. Enough air still escapes around the plugs to cover the middle of the windshield too.

Hope this helps.

But even so, the defroster works just fine.

What's the biggie?

 

[Parvezident]

Is the color of the sticker on the other side of the windshield also black?

The dinosaur? Yes, it’s black.

 

[RubenZ]

Adding Rubicon Take Offs really bumps up the looks of a SPORT. not to mention I still say Rubicon Wheels look best in a Sting Gray color.

 

[Mikeg4572]

Installed diff cover.

 

[TopPinArcher]

I

I am going to purchase the DV8 heat venting hood, where would I post my JL Rubicon hood and how do I find out a good asking price? TIA.

 

[emdub]

Hooked up my M-416 and went for a drive.

Love your M416. I want to restore one myself. Here's one that I'd like to model mine after:

 

[Brmbll007]

I switched my Rigid Industries D-Series cubes for the Baja Designs Squadron Pro Amber’s.

Where did you get the amber film for you stock JL fogs.

 

[Swanny297]

I installed a 2.5” inch skyjacker lift on my wrangler JLU! But.......

Now my “Service electronic stability control” light is on. Anyone think they know the issue or have any tips or suggestions?

I have to get an alignment done after installing the lift, couls that be the issue?

When you get your alignment checked ask them to center up your steering wheel. If they can’t watch a YouTube video it is pretty straight forward.

 

[Mecha]

I got myself some projects to perform on the wife's jeep this weekend.
DV8 front and rear bumpers
DV8 TireCarrier
Rockslide Industries Step/Sliders
Quadratec 10K synthetic Winch
Graphics package
Fender gap filler


...
Mopar 2 inch lift will be in next week.

 

[Stinggrayreb]

Got my Jeep back 3 days ago from having a new transmission put in since blowing the other one at 2,500 miles. 2 days ago took it to my local shop Trails West and had Dana Spicer 4.88’s put in, powder coated my diff covers, steer smarts drag link and tie rod and lastly the 1 piece RCV performance axle shaft. Rides like I’m on a cloud now.

Can you still take the hardtop off with those backup lights on the hardtop?

 

[Roky]

I got myself some projects to perform on the wife's jeep this weekend.
DV8 front and rear bumpers
DV8 TireCarrier
Rockslide Industries Step/Sliders
Quadratec 10K synthetic Winch
Graphics package
Fender gap filler


...
Mopar 2 inch lift will be in next week.

You might as well go ahead and order front adjustable lower control arms, adjustable front track bar and rear adjustable track bar or track bar relocation bracket with your Mopar lift, lol, I got 3.5 inches out of my Mopar lift, if you do, you’ll need these things to center your axles and get more castor.....

 

[sourdough]

Spent a good part of the day unpacking camping gear after 3 nights and 200 miles of Death Valley roads. it's a week and half old with just over 1,000 miles now.

 

[turk]

A balmy 16 deg F. Today for working on the jeep outside. Installed a garvin 54" wind deflector for my pioneer platform. Fabricated my own removable mounting brackets. Can still install and remove front freedom panels with deflector on.

 

[Jeep Generation]

A balmy 16 deg F. Today for working on the jeep outside. Installed a garvin 54" wind deflector for my pioneer platform. Fabricated my own removable mounting brackets. Can still install and remove front freedom panels with deflector on.

Looks great. Where did you get the Black and White KC Pro 6 covers?

Sponsored