CJ-ING-RJ
Well-Known Member
- Thread starter
- #1
Need some help please no lights. I’ve been reading through the forums and am only finding general discussions about how bad the install sucks. I am a electrician so I can get pretty technical with this.
I’ve got a 18 JLUR with steel bumpers and LED lighting packages for reference. I installed the Mopar 82215896 wiring harness this weekend. Install took time but went pretty easy. All connections look good.
The problem I am having is I’ve got only 12v power from the red wire at the 7 pin connector. Absolutely nothing else. I do have power at the input connector going into the module that is added behind the RR tail light. It’s seems like the Module is bad. Mopar is not willing to offer any over the phone assistance, they tell me it has to go to the dealer for troubleshooting then they will warranty it after I pay for labor.
Anyone have this issue or ideas on how to test the module.
Thanks in advance.
I’ve got a 18 JLUR with steel bumpers and LED lighting packages for reference. I installed the Mopar 82215896 wiring harness this weekend. Install took time but went pretty easy. All connections look good.
The problem I am having is I’ve got only 12v power from the red wire at the 7 pin connector. Absolutely nothing else. I do have power at the input connector going into the module that is added behind the RR tail light. It’s seems like the Module is bad. Mopar is not willing to offer any over the phone assistance, they tell me it has to go to the dealer for troubleshooting then they will warranty it after I pay for labor.
Anyone have this issue or ideas on how to test the module.
Thanks in advance.
Sponsored