What did you do TO your Jeep JL today?

[jeepfreak]

I did nothing except take her down to the river and watch the sunset !!

Nice. Which Nerf Bars do you have?

Sponsored

 

[JEEPJL]

Nice. Which Nerf Bars do you have?

NFAB - 3" DUAL STEP

 

[zyt]

I dip the Jeep in black, adding a not so creative hood decal, and finally put that sports bumper piece back on to cover fog lights.

 

[jeepfreak]

NFAB - 3" DUAL STEP

Thanks. Might have to get those for the kiddos

 

[sost1sg]

Thanks. Might have to get those for the kiddos

Check out the marketplace. Saw a member just posted them for sale new still in box.

 

[redracer]

Did the winch and ham radio install... for the radio head I glued magnets behind the radio bezel to match the magnets on the head. It holds really secure! The radio is under the passenger seat and the speaker is just Velcro’d in front of the drivers seat.

 

[BoisetheCat]

I dip the Jeep in black, adding a not so creative hood decal, and finally put that sports bumper piece back on to cover fog lights.

what was your process in getting the logo black? you removed the bumper to fender insert but what is this other piece to cover the fogs?

jeep looks great bro

 

[Chowbaby]

Washed and waxed up....

 

[zyt]

what was your process in getting the logo black? you removed the bumper to fender insert but what is this other piece to cover the fogs?

jeep looks great bro

The process is very easy. No need to remove the logo. Here is a great video for step by step. For the bumper insert, I remove the whole piece and cutout out the ugly extension and put the cover back on. A lot good info here: https://www.jlwranglerforums.com/fo...port-euro-close-out-cover-bumper-pieces.2996/

 

[TopPinArcher]

Headed to the Oregon Coast...got
Countless “is that the new JL?”

 

[tgoss]

Quite a bit....

Evo. 2.5 boost with drop brackets and shock extensions. What a nightmare to install.

Rusty's winch plate with Warn VR10S, Factor55 flat link/Fairlead and Baja Designs lights.

Finally have a buddy coming over tomorrow so I can finish these beadlocks. Really need a set of extra hands with these coopers.

 

[Izzy901]

Quite a bit....

Evo. 2.5 boost with drop brackets and shock extensions. What a nightmare to install.

Rusty's winch plate with Warn VR10S, Factor55 flat link/Fairlead and Baja Designs lights.

Finally have a buddy coming over tomorrow so I can finish these beadlocks. Really need a set of extra hands with these coopers.

Get my Evo boost installed Monday. Got the overland with the extensions and front lower control arms though. About how much actual height did you gain? Right at 2.5? More or less?

 

[jeepfreak]

Check out the marketplace. Saw a member just posted them for sale new still in box.

Will do. Thanks!

 

[tgoss]

Get my Evo boost installed Monday. Got the overland with the extensions and front lower control arms though. About how much actual height did you gain? Right at 2.5? More or less?

About 2.5 - 2.75... every corner is different by a slight margin and I had a horrible rake when I first let the rears down... I drove it this morning and it seemed to settle perfectly. Over all I'm happy with what it is as a product but good lord Evo could use a major improvement in the instruction department. Simple shit like labeling a part left or right would have probably helped me shave 2 hours off installing everything.

I always applaud poison spyder for their packaging and instructions. Every piece of hardware is always packaged by itself and labeled in the instructions where to go at what step.

This thing I couldn't even find instructions for and winged it.... Took about 10 hours start to finish.

 

[TopPinArcher]

About 2.5 - 2.75... every corner is different by a slight margin and I had a horrible rake when I first let the rears down... I drove it this morning and it seemed to settle perfectly. Over all I'm happy with what it is as a product but good lord Evo could use a major improvement in the instruction department. Simple shit like labeling a part left or right would have probably helped me shave 2 hours off installing everything.

I always applaud poison spyder for their packaging and instructions. Every piece of hardware is always packaged by itself and labeled in the instructions where to go at what step.

This thing I couldn't even find instructions for and winged it.... Took about 10 hours start to finish.

Glad you got it done. One reason I quit doing installs, love doing them but after 4 back surgeries 10 hours would have sucked and I always count my time as money.. what’s my time worth? How much does an installer charge? In the end your build looks great! Congrats

Sponsored