Wiring Question

[T-Rob]

So, I've purchased the below item for my Jeep. Not sure if I'm going to like them, but I do want to install them to see. Question: do I need to run a wire directly to the front blinkers under the inner fender firewall? Thanks.

https://www.quadratec.com/p/overtre...ent-led-lights-wrangler-jl-gladiator-jt-19052

Sponsored

 

[Stingray20Idaho]

So, I've purchased the below item for my Jeep. Not sure if I'm going to like them, but I do want to install them to see. Question: do I need to run a wire directly to the front blinkers under the inner fender firewall? Thanks.

https://www.quadratec.com/p/overtre...ent-led-lights-wrangler-jl-gladiator-jt-19052

Tim, this was my method.

 

[T-Rob]

Tim, this was my method.

Did you have to pull the inner fender liner to get to it?

 

[JoshuaaT]

Did you have to pull the inner fender liner to get to it?

Pulling the fenders off is easier and quicker. You just unbolt 4 bolts and pull the fender away. The inner fender liner comes with it.

 

[Stingray20Idaho]

Did you have to pull the inner fender liner to get to it?

Yes I did it while the fender liner was off, you just need access to the plug, you can also tap in on the fender side provided you follow the wiring diagram.

 

[T-Rob]

Pulling the fenders off is easier and quicker. You just unbolt 4 bolts and pull the fender away. The inner fender liner comes with it.

When I first read your post, I thought..."yeah, whatever." Then I YouTubed it and damn, you're right! LOL. Found a couple of great videos on it. I ordered some those clips off of Amazon "juuuuust" in case some of them break.

Thank you so much.

Sponsored