p99887
Member
- First Name
- p
- Joined
- Sep 20, 2018
- Threads
- 2
- Messages
- 16
- Reaction score
- 17
- Location
- California
- Vehicle(s)
- JLUR
- Thread starter
- #1
Hello,
This is my first post on this forum and I'm hoping to get some advice in regards to upgrading from the Alpine system. I'm not particularly happy with how it sounded stock, so my plan is to install the following:
Focal ES100K Front and Soundbar
Audison bit one DSP
JL Audio HD 900/5 Amp
JL Audio 10TW3-D4 Amp
Also have a JL HO112-W6V3 on order.
I'm debating between deleting the stock sub to run the HO112 or to keep the stock look and replace it with the TW3. This is where I hit a snag. After unbolting the 8 screws from the sub, I'm unable to pop it off. Does anyone know how the Alpine subwoofer comes out? I want to say there's a bolt in the back holding it down but would like to hear from those that have done this already.
Thanks in advance!
This is my first post on this forum and I'm hoping to get some advice in regards to upgrading from the Alpine system. I'm not particularly happy with how it sounded stock, so my plan is to install the following:
Focal ES100K Front and Soundbar
Audison bit one DSP
JL Audio HD 900/5 Amp
JL Audio 10TW3-D4 Amp
Also have a JL HO112-W6V3 on order.
I'm debating between deleting the stock sub to run the HO112 or to keep the stock look and replace it with the TW3. This is where I hit a snag. After unbolting the 8 screws from the sub, I'm unable to pop it off. Does anyone know how the Alpine subwoofer comes out? I want to say there's a bolt in the back holding it down but would like to hear from those that have done this already.
Thanks in advance!
Sponsored