jeepauug
Well-Known Member
- Thread starter
- #1
I just picked Sting Gray Moab - and am loving it. The theme for this build is a classic Pizza Cutter Stance. My plan as follows: I'm forgoing a lift and going with the Teraflex performance 1.5" leveling kit with falcon shocks with 33" pizza cutter tires.
Sting Gray MOAB Build "Stinger Rock"
Completed:
1. 20% Tint
2. BFG K02 34x10.5r17 (these measure 32.25" mounted)
3. Antennax 13"
4. Teraflex 1.5" ST1 with falcon shocks
5. Falcon 2.1 steering stabilizer
6. Mopar hinge gate reinforcement
7. Mopar center tail-light relocate
8. Spidertrax 1.75" wheel spacers
Planned:
9. Mopar winch guard
10. Mopar door sill guards275/70r18
11. Willis "4 wheel drive" decal
12. Mopar wheel locks
13. Borla Touring Axle-back exhaust (11955CB)
14. Hellwick rear sway-bar
15. Steer Smarts Yeti Track Bar
16. Rusty's Track Bar mount brace
17. Draglink upgrade - Yeti or Synnergy (researching)
Sting Gray MOAB Build "Stinger Rock"
Completed:
1. 20% Tint
2. BFG K02 34x10.5r17 (these measure 32.25" mounted)
3. Antennax 13"
4. Teraflex 1.5" ST1 with falcon shocks
5. Falcon 2.1 steering stabilizer
6. Mopar hinge gate reinforcement
7. Mopar center tail-light relocate
8. Spidertrax 1.75" wheel spacers
Planned:
9. Mopar winch guard
10. Mopar door sill guards275/70r18
11. Willis "4 wheel drive" decal
12. Mopar wheel locks
13. Borla Touring Axle-back exhaust (11955CB)
14. Hellwick rear sway-bar
15. Steer Smarts Yeti Track Bar
16. Rusty's Track Bar mount brace
17. Draglink upgrade - Yeti or Synnergy (researching)
Sponsored
Last edited: