Rubicon front camera

[DieselDan]

I have a 2022 Rubicon. Is it possible to add a front camera to the Alpine system?

Sponsored

 

[Kracka]

I believe a Tazer let's you do it all.

 

[redracer]

Possible, yes i believe...

But to do it factory style, with crisp HD quality, there is an additional module that connects between the uconnect head and the rear camera, then also connects to the front camera and power and canbus. I don't know if anyone has listed out all the wiring harnesses that you'll need. Then there is the programming, I think JScan can enable/disable the feature but I don't know if it will "Just work" or if the new module will need programming too.

As far as the Tazer solution.... that is much easier, but also lower quality as it enables and uses the analog Standard Def. input that was intended for a truck bed camera for the ram series trucks.

 

[Terrymo]

Yes it can be done but it will be very expensive…check the link. I have the OEM front trail cam which is marginal in quality and location, and the Wolfbox G900 tripro with bumper camera (which I was not given in exchange for a review). If I had to give up one it would be the factory camera,

https://www.jlwranglerforums.com/fo...diator-diy-writeup.111134/page-3#post-3387153

 

[DieselDan]

Possible, yes i believe...

But to do it factory style, with crisp HD quality, there is an additional module that connects between the uconnect head and the rear camera, then also connects to the front camera and power and canbus. I don't know if anyone has listed out all the wiring harnesses that you'll need. Then there is the programming, I think JScan can enable/disable the feature but I don't know if it will "Just work" or if the new module will need programming too.

As far as the Tazer solution.... that is much easier, but also lower quality as it enables and uses the analog Standard Def. input that was intended for a truck bed camera for the ram series trucks.

Thanks this is what I was expecting. Complicated and spendy. Se la vi!

Sponsored