Quick removal hardware for JL hardtop?

[@Brad_Matthews]

Looking for recommendations on the best hardware to replace the current bolts for quicker removal of the hardtop on a 2018 Unlimited JL. Here's a few names on Quadratec, but I'm open to other ideas.

• Lange Originals 020-700 Kwick Screws for 07-18 Jeep Wrangler JK & JL
• Kentrol 70008 Hardtop Quick Release Hardtop Screws for 03-18 Jeep Wrangler TJ, JK, & JL
• Rugged Ridge 13510.15 Elite Hardtop Quick Removal Kit for 07-18 Jeep Wrangler JK 2 & Wrangler JL 2 Door

Also, has anyone used one of these name brands for their hoist system on a JL hardtop:

https://www.quadratec.com/vehicle/jeep-wrangler-jl-parts/jeep-hardtops/hardtop-hoists


Thanks in advance!
-Brad

Sponsored

 

[kculp]

Lange kick screws for $34.95? That's absurd! What is the mark-up from manufacturing? Colors my trust of other Lange products.

 

[chcg12]

Do a quick search on amazon and you can find some for under $10-that fit the JK-probably will fit the JL too. They are convenient to have.

 

[nstone97]

My recommendation is to use a cordless impact driver with the torx bit from the toolkit. Takes me 1-2 minutes to have all 8 screws out/back in with no manual labor involved. I can't think of a reason to go with a knobed screw unless you plan to take the top on/off away from home quite often and without planning (bringing the driver with you).

 

[HABANEROTE]

My recommendation is to use a cordless impact driver with the torx bit from the toolkit. Takes me 1-2 minutes to have all 8 screws out/back in with no manual labor involved. I can't think of a reason to go with a knobed screw unless you plan to take the top on/off away from home quite often and without planning (bringing the driver with you).

THIS IS WHAT I DO ALL THE TIME...

 

[RussJeep1]

My recommendation is to use a cordless impact driver with the torx bit from the toolkit. Takes me 1-2 minutes to have all 8 screws out/back in with no manual labor involved. I can't think of a reason to go with a knobed screw unless you plan to take the top on/off away from home quite often and without planning (bringing the driver with you).

This..

 

[blueshirtz11]

What size impact driver, 1/4”?

 

[@Brad_Matthews]

Sounds like a plan. Thanks to everyone for the feedback. Now I just have to track down a soft top, seat covers, etc.

 

[BigJimSlade]

I was considering using one of these with my cordless drill. Anyone have any experience with it?

https://www.amazon.com/dp/B00C0VSNKQ/ref=cm_sw_r_other_apa_i_eK85AbR7N7CNE

 

[simpleJL]

I was considering using one of these with my cordless drill. Anyone have any experience with it?

https://www.amazon.com/dp/B00C0VSNKQ/ref=cm_sw_r_other_apa_i_eK85AbR7N7CNE

That's going to make for one massive drill. Lol

Just buy a Milwaukee M12 ratchet.

Battery and charger are separate though.

Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger (Battery Not Included, Power Tool Only) https://www.amazon.com/dp/B006CSRBTC/ref=cm_sw_r_cp_apa_i_jKh6Ab43D53WC

 

[FatBoy01]

snipe:

Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger

Yup, I have one and it is a pleasure to use for removing bolts such as the hard top torx head bolts.

 

[Texcal]

You can look into these too: https://gpca.us/shop/jeep-wrangler-jl-jk-hardtop-quick-release/

 

[@Brad_Matthews]

You can look into these too: https://gpca.us/shop/jeep-wrangler-jl-jk-hardtop-quick-release/

Thanks. Those look pretty sharp.

 

[Skippy]

This is exactly what I ued in my JKUR as well as now my JLUR.
https://www.menards.com/main/tools-...600-c-9072.htm?tid=6148822482413060174&ipos=3

 

[WXman]

Cordless drill?

Dude, give me a ratchet, small extension, and the torx socket and I'll have those 6 bolts out in 60 seconds. Why do we need "quick screws"?

Sponsored