Newbie Question

[glens911]

So i went a little crazy when I first bought the Jeep. I have a 2019 JLU Rubicon stock. I bought a Skyjacker 3.5-4in Dual Rate Coil Suspension lift for it. I only want to do 35's because it will be daily driver. And the 35's will be put on the Rubi stock rims. Honest opinion is this too much lift.

Sponsored

 

[BDinTX]

Tires may look small in the wheel wells. Do you know how much lift you should realistically expect? A lot of 2.5” lifts give 3”

 

[word302]

Too much lift and questionable quality at best.

 

[mwilk012]

I would sell it if I were you.

 

[Jeepeto]

So i went a little crazy when I first bought the Jeep. I have a 2019 JLU Rubicon stock. I bought a Skyjacker 3.5-4in Dual Rate Coil Suspension lift for it. I only want to do 35's because it will be daily driver. And the 35's will be put on the Rubi stock rims. Honest opinion is this too much lift.

Most guys run a 2” lift with 35s

Here’a my old rig on 35x12.5s and 2” of lift.

Here’s my current rig on 3.5” lift and 35x12.5

3.5” and 37s

 

[glens911]

Thanks everyone. By the way i was looking at the Mopar lift but any others in the 2.5 range that wont break the bank

 

[word302]

 

[glens911]

Thanks I'll look into this

 

[Hucke_250]

If you can’t sell the lift or exchange it, go with the 37x12.5 KO2 c load.

 

[Old Dogger]

A 2.0” to 2.5” is all that is needed. This will look good with 35’s.

Sponsored