Ridergda
Member
- Thread starter
- #1
Hello everyone, I have a 2021 Ecodiesel 3.0. I am done with waited for the turbo to cool down.
So i was going to installed an Edge CTS 3, 98602, and 98604 turbo timer.
The installation went smoothly until I encountered an issue.
I connected the 12V power and ignition to the appropriate fuse locations. However, when the turbo timer was activated, the engine light illuminated, the cooling fan reached maximum speed, and I received a U0101 code indicating a loss of connection to the transmission control module (TCM).
I realized that when the run circuit was turned off, several sensors and equipment lost their 12V power supply simultaneously. I attempted to provide power to these components, but I was unable to locate the correct fuse.
Any assistance or guidance in resolving this issue would be greatly appreciated.
So i was going to installed an Edge CTS 3, 98602, and 98604 turbo timer.
The installation went smoothly until I encountered an issue.
I connected the 12V power and ignition to the appropriate fuse locations. However, when the turbo timer was activated, the engine light illuminated, the cooling fan reached maximum speed, and I received a U0101 code indicating a loss of connection to the transmission control module (TCM).
I realized that when the run circuit was turned off, several sensors and equipment lost their 12V power supply simultaneously. I attempted to provide power to these components, but I was unable to locate the correct fuse.
Any assistance or guidance in resolving this issue would be greatly appreciated.
Sponsored