jlewissystem
Well-Known Member
- Thread starter
- #76
Followed someone else's recent post and blacked out the stock muffler. It makes the MC hardware and shocks POP! Thanks to @BbyGrlJJ for the help on both Initially, i did a flat black, but @BbyGrlJJ picked up a semi-gloss, which looked way better and matched our undercoated POR15 better.
Here's the paint we used - https://www.walmart.com/ip/Rust-Oleum-Specialty-High-Heat-Ultra-Black-Spray-Paint-12-oz/17011115
1 can should do an entire muffler, with touchups.
It's easier to just unbolt the hangers from the frame, as opposed to try and fight the hangers.
FYI - Exhaust/muffler clamp is 15mm. Hanger is 13mm (4 bolts total)
My before/after: (I just touched up, so that's why it looks wet)....and it's 84% humidity
Archangel after: (Pre-lift/shocks)
I dont expect this paint to fully hold up, but all good - touchup!
Here's the paint we used - https://www.walmart.com/ip/Rust-Oleum-Specialty-High-Heat-Ultra-Black-Spray-Paint-12-oz/17011115
1 can should do an entire muffler, with touchups.
It's easier to just unbolt the hangers from the frame, as opposed to try and fight the hangers.
FYI - Exhaust/muffler clamp is 15mm. Hanger is 13mm (4 bolts total)
My before/after: (I just touched up, so that's why it looks wet)....and it's 84% humidity
Archangel after: (Pre-lift/shocks)
I dont expect this paint to fully hold up, but all good - touchup!
Sponsored