How Can We Help?

[zouch]

thanks again! appreciate the effort!

Ah I see, Since Mopar/Jeep discontinued their relationship with Fox these are going to be impossible to get. The only thing I can think of is to have them custom made. Perhaps there are others here on the forum that would be interested as well.

- Benny

Sponsored

 

[abecker]

Hey Benny,
The dealership I bought a jeep from lost a few of the bolts. I'm trying figure out what the part number is for the 5 bolts that fill in the holes around the winch, along with the two bolts on each side that go above and below the fog lights. Its hard to tell what they are from the diagrams but hoping you have links to the parts.

 

[AllMoparParts.com]

Hey Benny,
The dealership I bought a jeep from lost a few of the bolts. I'm trying figure out what the part number is for the 5 bolts that fill in the holes around the winch, along with the two bolts on each side that go above and below the fog lights. Its hard to tell what they are from the diagrams but hoping you have links to the parts.

Hi Andy,

The top 5 holes get plugs
https://parts.allmoparparts.com/oem-parts/mopar-push-pin-68582107aa

The front holes use these bolts
https://parts.allmoparparts.com/oem-parts/mopar-screw-68355472aa
And it looks like youll need these nuts as well
https://parts.allmoparparts.com/oem-parts/mopar-u-type-multi-thread-nut-6105244aa

All hardware is sold individually so please order accordingly. I will send you a code to use

- Benny

 

[abecker]

Hi Andy,

The top 5 holes get plugs
https://parts.allmoparparts.com/oem-parts/mopar-push-pin-68582107aa

The front holes use these bolts
https://parts.allmoparparts.com/oem-parts/mopar-screw-68355472aa
And it looks like youll need these nuts as well
https://parts.allmoparparts.com/oem-parts/mopar-u-type-multi-thread-nut-6105244aa

All hardware is sold individually so please order accordingly. I will send you a code to use

- Benny

Thank you! Where are the U type nuts needed?

 

[AllMoparParts.com]

Thank you! Where are the U type nuts needed?

My parts diagram shows for the front bolts above and below the fog lamp. Looking at the bumper center section images itself its hard to tell if these holes are threaded, If you find that they are then no U-nuts needed.

Thanks,
- Benny

 

[JPSJR70]

Hey Benny, hope you’re doing wel. Question? Need two new LED Taillights w/Blindspot for my ‘23 392, can you send me a quote? Is it possible to swap out the blind spot pieces to the new ones? Jose

 

[4LowNGo]

Hey Benny! Dealer says I need to replace my rear park assist camera harness. It’s a 2022 JLU Sahara, any help finding the right harness would be appreciated Thanks

 

[gary4xe]

Hi Benny I was directed to you for an answer. I need part numbers for the black plastic panel that runs from the bottom floor panel along the scuff plate. I think it is 2 pieces and I believe it covers the wiring. They are held on by clips just cant find part numbers. 2023 JL 392 TYIA

 

[AllMoparParts.com]

Hey Benny! Dealer says I need to replace my rear park assist camera harness. It’s a 2022 JLU Sahara, any help finding the right harness would be appreciated Thanks

Hi Andy,
I would like to check this with your VIN please

- Benny

 

[AllMoparParts.com]

Hi Benny I was directed to you for an answer. I need part numbers for the black plastic panel that runs from the bottom floor panel along the scuff plate. I think it is 2 pieces and I believe it covers the wiring. They are held on by clips just cant find part numbers. 2023 JL 392 TYIA

Hi Gary,
Which door opening is this located at?

- Benny

 

[gary4xe]

Hi Gary,
Which door opening is this located at?

- Benny

I’m looking to replace both front sides as they are all scuffed pretty bad. Wanted to buy new ones

 

[4LowNGo]

Hi Andy,
I would like to check this with your VIN please

- Benny

1C4HJXEG4NW248335

 

[Catiajockey]

I have 4 door JL and I need a soft top part. My right side (passenger) rear window ripped off at highway speeds this morning. So not only do I need a new window (can get that from Best top) I need the corner stiffener piece. Quadratec says that MOPAR does not offer that separately, I am
hoping you know better.

 

[AllMoparParts.com]

I’m looking to replace both front sides as they are all scuffed pretty bad. Wanted to buy new ones

Ok here are links

Drivers side
https://parts.allmoparparts.com/oem-parts/mopar-wiring-protector-cover-left-6ru69tx7ad
https://parts.allmoparparts.com/oem-parts/mopar-b-pillar-lower-trim-panel-left-7et31tx7ab

pass side
https://parts.allmoparparts.com/oem-parts/mopar-wiring-protector-cover-right-6ru68tx7ad
https://parts.allmoparparts.com/oem-parts/mopar-b-pillar-lower-trim-panel-right-7et30tx7ab

- Benny

 

[AllMoparParts.com]

1C4HJXEG4NW248335

Thanks, Heres a link for it https://parts.allmoparparts.com/oem-parts/mopar-high-mounted-stop-lamp-wiring-68432092ab

- Benny

Sponsored