How Can We Help?

[redsyphon]

Hello,
Hoping you can help me locate a replacement "Scuff Swing Gate" plastic panel.

It is the panel that sits under the cargo area floor at the swing gate and holds the bolts, etc., when you take off the top or doors.

I've attached a picture of the tag on the back, but I havent been able to find anything online yet.

Thanks in advance!

Sponsored

 

[AllMoparParts.com]

Hello,
Hoping you can help me locate a replacement "Scuff Swing Gate" plastic panel.

It is the panel that sits under the cargo area floor at the swing gate and holds the bolts, etc., when you take off the top or doors.

I've attached a picture of the tag on the back, but I havent been able to find anything online yet.

Thanks in advance!

Hi James,

Yes the part # is 6BM42TX7AC and can be ordered here
https://parts.allmoparparts.com/oem-parts/mopar-cargo-tray-6bm42tx7ac

It may be cheaper though to pick this up locally if that is all that you needed. Please let me know if you have any questions.
Thanks,
-Benny

 

[ChadT]

Hello Benny
I placed a large order about 10 days ago and seems nothing has happened with it. Are there delays in general or would my entire order be held up over something that's backordered? my order number is 145024314

Thanks

 

[AllMoparParts.com]

Hello Benny
I placed a large order about 10 days ago and seems nothing has happened with it. Are there delays in general or would my entire order be held up over something that's backordered? my order number is 145024314

Thanks

Hi Chad,
We are waiting on one more part to arrive which has an eta of 8/13.

Thank you for your patience,
- Benny

 

[swampcat14]

Hi Benny!

First off, thanks for your help here, it is greatly appreciated!!

I'm looking for a capture nut that goes inside the frame on the passenger side, for one of the gas tank mounting bolts.

Thanks in advance!

 

[AllMoparParts.com]

Hi Benny!

First off, thanks for your help here, it is greatly appreciated!!

I'm looking for a capture nut that goes inside the frame on the passenger side, for one of the gas tank mounting bolts.

Thanks in advance!

Hi Steve,

Happy to help when we can, Thanks!

Our catalog shows part #6101831 is used but this looks like a standard M8x1.25 nut as shown below

Let me know if that looks right to you

- Benny

 

[Quadjeeper]

Still waiting on the Mopar indash trailer brake controller, been on back order for months. Any release date yet?

 

[swampcat14]

Hi Steve,

Happy to help when we can, Thanks!

Our catalog shows part #6101831 is used but this looks like a standard M8x1.25 nut as shown below

Let me know if that looks right to you

- Benny

Hmm, that's different than what the original looks like (see attached pictures). I think the piece pictured also originally had a plastic piece of some kind to help hold its position in the frame. Maybe FCA changed the type of fastener since my Jeep was assembled?

 

[AllMoparParts.com]

Still waiting on the Mopar indash trailer brake controller, been on back order for months. Any release date yet?

Hi Scott,

It's not expected until December. All that we know is that it's in development. Sorry we dont have any more info to share.

- Benny

 

[AllMoparParts.com]

Hmm, that's different than what the original looks like (see attached pictures). I think the piece pictured also originally had a plastic piece of some kind to help hold its position in the frame. Maybe FCA changed the type of fastener since my Jeep was assembled?

I believe that the flanged edge was originally peened over holding it in place. I searched through our parts catalog but could not find it. Best bet would be to search online for a generic one however I am unsure of the proper name for it. Another option may be a heavy duty nutsert.

- Benny

 

[swampcat14]

I believe that the flanged edge was originally peened over holding it in place. I searched through our parts catalog but could not find it. Best bet would be to search online for a generic one however I am unsure of the proper name for it. Another option may be a heavy duty nutsert.

- Benny

Okay thanks! I've been looking online and it seems to bee called a self-clinch nut, and this particular one is made by a company called RIFAST.

I'll keep looking, but thanks for the help!

 

[AllMoparParts.com]

Okay thanks! I've been looking online and it seems to bee called a self-clinch nut, and this particular one is made by a company called RIFAST.

I'll keep looking, but thanks for the help!

I think your on the right track Steve from looking at images

- Benny

 

[Quadjeeper]

Hi Scott,

It's not expected until December. All that we know is that it's in development. Sorry we dont have any more info to share.

- Benny

Wow, ok, thanks.

 

[CaptSully]

Hi Benny,

I have a 2020 Sport Altitude with original incandescent turn signals. I bought LED's (55112884AF
55112885AF 68302119AB 68302120AB) that I want to install but am unsure of the correct P/N for the front fender flares that I need. Any help os greatly appreciated....

Thanks
Mike

 

[AllMoparParts.com]

Hi Benny,

I have a 2020 Sport Altitude with original incandescent turn signals. I bought LED's (55112884AF
55112885AF 68302119AB 68302120AB) that I want to install but am unsure of the correct P/N for the front fender flares that I need. Any help os greatly appreciated....

Thanks
Mike

Hi Mike,

The Molded in Black Rubi flares are
6CE73RXFAG
6CE72RXFAG
You will also need the splash guards/liners
68299171AB
68299170AB

Here is a photo of what these flares will look like

Please let me know if you have any other questions.
Thanks,
-Benny

Sponsored