Help finding part or part #

[Timmay]

While removing my front fender to install the new Morimoto sequential lights, I missed a bolt and broke the driver side LED mounting bracket. We couldn't find it in the diagrams at the dealership. I actually had spare fenders and discovered that halogen and LED apparently use different mounting brackets. TIA for any help!

Here are the photos. Top won't fit, most likely halogen lights and or non-Rubicon models. The bottom is the one I broke.

Best I can tell, I see:
mldflh-drlbkt-bb
Rub drl lh
21419a
5875
>PP-GC30<
SHRINK 0.0035"

Sponsored

 

[Cuyose]

I am looking for the same thing on my 2020 Rubicon, and mine looks totally different, its a honeycomb thing, but the exact same is stamped on it unfortunately

 

[Fusilli Jerry]

Same thing happened to me. I missed that same bolt (in a recessed area in the fender liner), and broke that part during removal.

I was able to glue it back together with Gorilla Glue, but only after I also went to dealer and he couldn't find it either.

Glue worked very well, I mounted it back in the fender and reattached. Even if it breaks, the fender is still mounted in 2 other areas with sturdy bolts, as well as clips.

But I would like to get that part only. It's the only thing that broke. Fender, lights, etc...all fine.

 

[jroever]

Did you ever resolve this? My daughter hit a driveway column during driving practice and the bracket got shattered into many pieces. My guess is it comes with the rest of the Wheel Flare Molding ...

 

[RenegadeT]

21419A must not be a Mopar p/n...maybe. material code or supplier ID.
Google found this thread for me, searching for a similar piece of my 2018 2dr Rubicon, left rear flare.

 

[Bumble]

RenegadeT -Did you ever figure out how or where to get this Part ?
I need the
RUB RR AFT RH
I have the FORE RH but it must the opposite as I am missing pieces and can not see the whole piece...
It's like Jeeps best kept Secret !! LOL
I was ble to plastic weld everything else back together but am hosed without this piece

 

[20JUR]

I am looking for the same thing 21419A 5875

 

[Terrymo]

I am looking for the same thing 21419A 5875

For any help finding a part hit up Benny from @AllMoparParts.com in this thread. He’s always super helpful,
https://www.jlwranglerforums.com/forum/threads/how-can-we-help.6130/

 

[AllMoparParts.com]

For future reference to others these brackets are part of the flare/fender assembly and are not available as separate components.

- Benny

 

[RubiDukkie]

When I broke my drivers side Fender Flare DRL Support Bracket, I was able to find a used one here:

https://www.usedjeepwranglerparts.com/

 

[azjl#3]

Jb weld with metal

 

[Crsn]

IF ANYONE IS LOOKING FOR THE BRACKETS IN THE FENDER i GET THEM OFTEN AND USUALLY LIST ON EBAY. YOU CAN MESSAGE ME HERE.

Sponsored