EcoDiesel Muffler Delete

[Famof5jeep]

Does anyone know of a bolt on option for this yet? I’ve seen the 3.6 versions online. Looking for clearance but don’t want to ruin the exhaust tone.

Sponsored

 

[Compression-Ignition]

Why don't you just remove it and see what is sounds like? There is a clamp right near the axle. Looks like that back section (that mainly consists of the muffler) would be very easy to remove.

Worry about finding a muffler delete extension, after you decide if you like the sound.

 

[Oilburner]

Why don't you just remove it and see what is sounds like? There is a clamp right near the axle. Looks like that back section (that mainly consists of the muffler) would be very easy to remove.

Worry about finding a muffler delete extension, after you decide if you like the sound.

‘Pretty’ sure somebody on here has already done exactly this, hopefully they will chime in-

 

[Compression-Ignition]

‘Pretty’ sure somebody on here has already done exactly this, hopefully they will chime in-

Yeah I remember seeing someone do it too. The point I was trying to make to Famof5jeep was that they should just remove it and hear the sound for themselves. Cost = free

 

[JLDIESEL]

Zero sound difference. Welded on at a muffler shop

 

[WXman]

Yeah the EcoDiesel has so many emissions components between the turbo and tail pipe it'll be almost no difference whatsoever to remove the little muffler at the end. But, I've been thinking about it too.

 

[USMC0311]

Zero sound difference. Welded on at a muffler shop

 

[USMC0311]

My 3.0L is so quiet I can hardly tell its a diesel. You removed the exhaust from the cat back and it still sounds the same? Will it still pass emissions in the future? Thanks.

 

[Compression-Ignition]

I thought our 3.0L was quiet, but the other day I was driving next to my wife in our 6.7L Ford and the Jeep sounded like the diesel.

 

[NW_Jeep]

Mine has gotten louder now at 10k miles

 

[JRMedic19]

Has anyone tried to delete the muffler and clamp on a wider tip? This should change the sound of the exhaust. Should.

Example: https://afepower.com/afe-power-49t30401-b09-mach-force-xp-3-304-stainless-steel-exhaust-tip

Also, i found this from Magnaflow, not sure if this is a wide enough tip for much of a sound change but this looks like a clean install.
https://www.magnaflow.com/products/...back-performance-exhaust-system?aces=13844954

 

[JRMedic19]

My 3.0L is so quiet I can hardly tell its a diesel. You removed the exhaust from the cat back and it still sounds the same? Will it still pass emissions in the future? Thanks.

Changes from the rear axle and back will not affect the emissions. A muffler now a days barely does anything on a modern diesel because of all the emissions control devices. Remember back in the day when the exhaust would simply come out through the header, down the collector and pipe, and then through a muffler and out? With lots modern vehicles, resonators have to be added to bring back the sound to the exhaust.

Sponsored