BFG KM3s Coming

[DesertsJL]

Thanks, I'm going with the same combo you have, different color powder coating (probably red) on my Billet Silver.

I'll probably pickup a set of these...

https://www.quadratec.com/products/16053_520.htm

The [Banned Site] guy on youtube just drilled a hole in a couple hockey pucks to extend the stock bump stops.

Those are fantastic. Basically exactly the same as the ones that come with the Mopar tailgate reinforcement kit. Much better than a couple hockey pucks.

Sponsored

 

[Steveo]

Those are fantastic. Basically exactly the same as the ones that come with the Mopar tailgate reinforcement kit. Much better than a couple hockey pucks.

After further reviews, or reading of them, not that brand.

 

[Steveo]

The 35’s fit just fine on mine short the need to extend the bumpstops. You will need to do something there.

I just received my reinforcement bracket and see that it comes with the spare bump stops/isolators. Were these not long enough for the Mopar wheel/KM3 combo on your rig? Too long?

Thanks.

 

[DesertsJL]

I just received my reinforcement bracket and see that it comes with the spare bump stops/isolators. Were these not long enough for the Mopar wheel/KM3 combo on your rig? Too long?

Thanks.

Those did not even touch the tire with the kit installed. They might work for the stock wheel and tire, but not anything aftermarket that I can think of. They were short of the Mopar wheels by about 1/2”.

The “accordion” style bumpstops that were a part of the bracket lift kit fit well. I had to cut off one of the sections and then they were perfect.

 

[DesertsJL]

These versions of bumpstops are shown with the Mopar wheels and 35/12.5/17 KM3 tires. The first is the extended bumpstops that comes with the tailgate reinforcement kit. The second is the bumpstops that come with the Oversized spare tire kit (with one section cut off).

 

[Austin23]

Zoom in and you can read the sidewall.

Zoom in and you can read the sidewall.

Very nice stance.. What kinds of wheels are these?

 

[pnut]

Very nice stance.. What kinds of wheels are these?

These appear to be custom finish, of Mopar wheels available online or at a dealer. Very cool wheels. I *almost* pulled the trigger on these.

https://www.allmoparparts.com/sku/77072494ab.html

Sponsored