Sponsored

Aux Wiring in cabin

CMTAZ

Well-Known Member
Joined
Oct 9, 2021
Threads
43
Messages
278
Reaction score
304
Location
Phoenix
Vehicle(s)
2024 JLURX Anvil
Can anyone post where the Aux wiring harness is in the cabin. I need the ignition on wire and I've seen passenger's footwell AND driver's footwell.

Thank you
Sponsored

 

Terrymo

Well-Known Member
First Name
Terry
Joined
Jun 17, 2022
Threads
48
Messages
11,052
Reaction score
34,147
Location
SoCal
Vehicle(s)
2023 JLURXR 3.6 ET
Clubs
 
Passenger side footwell under the HVAC blower running along the top edge of the carpet. They may be folded back on themselves and taped up
Jeep Wrangler JL Aux Wiring in cabin IMG_1019
Jeep Wrangler JL Aux Wiring in cabin IMG_1020
 

smitty-04

Well-Known Member
Joined
May 4, 2026
Threads
0
Messages
80
Reaction score
202
Location
OH
Vehicle(s)
2026 Jeep Wrangler Willys JLU
Passenger only. Carefully cut and unwrap the smooth vinyl tape shown in the pic above.

Related note: The Red/White constant 12v battery source is only 10A. I learned the hard way :)
 
OP
OP
CMTAZ

CMTAZ

Well-Known Member
Joined
Oct 9, 2021
Threads
43
Messages
278
Reaction score
304
Location
Phoenix
Vehicle(s)
2024 JLURX Anvil
Thank you. The USB adapter for a dashcam is 2A, so that should be good.
 

Sponsored

smitty-04

Well-Known Member
Joined
May 4, 2026
Threads
0
Messages
80
Reaction score
202
Location
OH
Vehicle(s)
2026 Jeep Wrangler Willys JLU
What were you hooking up?
Tury Pro one-touch window up/down module.

I thought I was being clever by using the aux battery connection avoiding running the wire through the firewall direct to the battery.

The module needs 30A.

Oops.

I did hook up my old skool fog lights to AUX1 using the harness under the hood by the battery, easy-peasy.
 

Dejen3303

Member
First Name
Dave
Joined
Apr 29, 2026
Threads
0
Messages
19
Reaction score
15
Location
Bullard Texas
Vehicle(s)
2025 Rubicon 2dr
My 2025 has 6 inside the cabin, 2 high amp aux, 2 low amp aux, 1 low amp switched from "key switch" and 1 low amp hot. It's recommended that if you use the two that not aux switched that you use a fuse. When I wired my GPS I put in a home made harness from the negative standoff to cover any additional wiring to inside.
 
 







Top