arb dual compressor mounted under power seats

[ParadigmDawg]

I wonder if it will work with my Grimm under hood mount? Are the plugs and wiring the same? Would be great if I could unbolt my old one, install the new one, and use the same plugs and wiring.

Totally different wiring harness.

Sponsored

 

[jellis4148]

Looks like I'll be buying a whole new kit soon, maybe. The one I have hasn't given me any issues. Did blow a fuse once, but that was after being on the Rubicon trail all day, then airing up 8 37's from 10 psi to 30 without a break. Just got too hot and blew one of the fuses. No issues since.

 

[Northridge4x4]

I wonder if it will work with my Grimm under hood mount? Are the plugs and wiring the same? Would be great if I could unbolt my old one, install the new one, and use the same plugs and wiring.

The new Brushless twin has a completely different electrical system, it is quite a bit more advanced than the classic twin.

Check out our video with @Tech Tim taking you through the new brushless twin, what's new and some performance testing.

 

[Khaled]

My Under Front Seat Mount will work with the power seats with no modifications needed. I made some adjustments to the mount last Fall for the power seats. I have the newest updated mounts in production now. I made a few tweaks for the new brushless compressors to fit. The mount will now hold the classic ARB twin and single as well and the new twin and single brushless on either driver or passenger side. It will also hold several of the ViAir compressors including the new ViAir VMS 400 dual setup. All in one mount

I should have the mounts from production within two weeks.

https://813fabrication.com/products/jeep-jl-gladiator-under-front-seat-compressor-mount

Let me know if I can answer any questions!

My Under Front Seat Mount will work with the power seats with no modifications needed. I made some adjustments to the mount last Fall for the power seats. I have the newest updated mounts in production now. I made a few tweaks for the new brushless compressors to fit. The mount will now hold the classic ARB twin and single as well and the new twin and single brushless on either driver or passenger side. It will also hold several of the ViAir compressors including the new ViAir VMS 400 dual setup. All in one mount

I should have the mounts from production within two weeks.

https://813fabrication.com/products/jeep-jl-gladiator-under-front-seat-compressor-mount

Let me know if I can answer any questions!

Will this work for an ARB twin brushless compressor under the electric seat of a 2024 392?

 

[813 Fabrication & Design]

Will this work for an ARB twin brushless compressor under the electric seat of a 2024 392?

Yes, the ARB twin brushless or classic will work under the power seat with no trimming or modifications.

Sponsored