Amp power wire through firewall

[oceanblue2019]

@JeepCares it would be great if we can get a firewall hole on the passenger side, so we can wire stuff to the battery. This forum is full of "how do I run cables through the firewall?" threads.

You have one. Read my thread above. A nipple exists for this exact reason.

Sponsored

 

[melendez69]

Looks like this is the only option. Thank you for your help. Appreciate it

If you haven't done this yet, be careful. I was able to do this seamlessly when I installed a dual battery kit. I used a fish tape through the grommet, and once you're in, it slides into the passenger footwell easily.

The easiest way is as others have mentioned... by removing the fender liner.

 

[donmontalvo]

You have one. Read my thread above. A nipple exists for this exact reason.

Yep. I’m aware of that location. For running a single (uno) wire to the battery.

My request is for @JeepCares to submit a request for an easier way to run wires for our after market mods to the battery.

A way that doesn’t require contortionist skills, or risking damaging critical wiring.

Thanks

 

[Sheoran05]

If you haven't done this yet, be careful. I was able to do this seamlessly when I installed a dual battery kit. I used a fish tape through the grommet, and once you're in, it slides into the passenger footwell easily.

The easiest way is as others have mentioned... by removing the fender liner.

I did it last week and used a metal coat hanger to fish through it.
Thank you

Sponsored