Any LED DRL that don't need a flash?

[btkrausen]

Want to replace my factory DRL in my JLUR without the LED package so I have matching colored lights in the front (have the Inspired Engineering LED headlamps).

Which aftermarket replacements don't require a flash?

Sponsored

 

[Red_rubicon_84]

Want to replace my factory DRL in my JLUR without the LED package so I have matching colored lights in the front (have the Inspired Engineering LED headlamps).

Which aftermarket replacements don't require a flash?

I ordered this product from quake. I called them and they confirmed that this product is plug and play--no tazer flash needed.

https://www.quakeled.com/product/je...fit-slim-chop-kit-drl-w-sequential-switchback

 

[btkrausen]

I ordered this product from quake. I called them and they confirmed that this product is plug and play--no tazer flash needed.

https://www.quakeled.com/product/je...fit-slim-chop-kit-drl-w-sequential-switchback

Thanks. I ended up just buying some LED replacement bulbs on Amazon that were made for the JL and it worked out great

 

[ChattVol]

Thanks. I ended up just buying some LED replacement bulbs on Amazon that were made for the JL and it worked out great

Looks great....do they flicker at all when you use your blinker? Easy install? Will you post a link for the bulbs?

 

[blnewt]

Make sure it's a 7443CK bulb for the correct polarity a standard 7443 won't work. I got mine on Amazon but had to trim the socket housing tab to get a good fit.

 

[btkrausen]

These are the bulbs I got for the fog lights - https://amzn.to/323x8uP

And these are the bulbs that I got for the side markers and DRLs - https://amzn.to/3345D5N

I also got a trim removal kit to help get the fender off just enough to get to the bulbs - https://amzn.to/36pctVd

 

[btkrausen]

Looks great....do they flicker at all when you use your blinker? Easy install? Will you post a link for the bulbs?

Now, I've only had them on for a day or two but I've seen no flickering at all so far. Install was super easy for the fog lights, and a little harder for the side markers but you just need to take out the one 8mm screw and then pop off two plastic clips (round) and you have access to the bulbs.

 

[ChattVol]

These are the bulbs I got for the fog lights - https://amzn.to/323x8uP

And these are the bulbs that I got for the side markers and DRLs - https://amzn.to/3345D5N

I also got a trim removal kit to help get the fender off just enough to get to the bulbs - https://amzn.to/36pctVd

Thanks....but the link for the DRL's claims to only be for Rubicon or Sahara. I have a sport s

 

[ChattVol]

Make sure it's a 7443CK bulb for the correct polarity a standard 7443 won't work. I got mine on Amazon but had to trim the socket housing tab to get a good fit.

Thanks...I also have a sport s. Will you send a link to the LED bulbs you used for the DRL's and side markers that dont flicker?

 

[btkrausen]

Thanks....but the link for the DRL's claims to only be for Rubicon or Sahara. I have a sport s

Oops, sorry. I have a Rubicon

 

[blnewt]

Thanks....but the link for the DRL's claims to only be for Rubicon or Sahara. I have a sport s

Thanks...I also have a sport s. Will you send a link to the LED bulbs you used for the DRL's and side markers that dont flicker?

Sorry, I was referring to having to trim the fog light LEDs, the DRL fender switchbacks are plug & play (and are awesome )
Here's the link for those, might check Jegs for even better pricing though.
https://www.oraclelights.com/produc...switchback-high-output-can-bus-led-bulbs-pair

 

[df007]

I ordered this product from quake. I called them and they confirmed that this product is plug and play--no tazer flash needed.

https://www.quakeled.com/product/je...fit-slim-chop-kit-drl-w-sequential-switchback

I have my eyes on these as well. They looks sick. Will be interested to see how they work for you. Were they actually in stock?

 

[Northridge4x4]

The Oracle Bi-LED headlights don't need a reflash.

https://www.northridge4x4.com/part/...e-lighting-oculus-bi-led-projector-headlights

 

[btkrausen]

The Oracle Bi-LED headlights don't need a reflash.

https://www.northridge4x4.com/part/...e-lighting-oculus-bi-led-projector-headlights

Those are headlights....we're talking about DRLs

 

[ChattVol]

These are the bulbs I got for the fog lights - https://amzn.to/323x8uP

And these are the bulbs that I got for the side markers and DRLs - https://amzn.to/3345D5N

I also got a trim removal kit to help get the fender off just enough to get to the bulbs - https://amzn.to/36pctVd

I have rubicon halogen fenders bolted on a sport s. Do the bulbfrost bulbs in the turn signals not require a resistor to avoid hyper flashing?

Sponsored