GWM4Tennis
Member
- Thread starter
- #1
I had to get new fuses and relays after installing the Aux switches and none fit in and none are clicking into the fuse box. Anyone have Idea about this? Not getting any power after install.
Sponsored
Did you install yourself or dealer install?I had to get new fuses and relays after installing the Aux switches and none fit in and none are clicking into the fuse box. Anyone have Idea about this? Not getting any power after install.
It sounds like you installed yourself... If so, you'd have to get the dealer to flash unless you can on your own.I had to get new fuses and relays after installing the Aux switches and none fit in and none are clicking into the fuse box. Anyone have Idea about this? Not getting any power after install.
It has been flashed and showing on the Uconnect. I did it myself as far as installDid you install yourself or dealer install?
If yourself... The dealer needs to flash the computer to tell the system you now have aux switches installed.
Which fuse block? From my understanding the fuses are independent of a fuse block and is located within the engine compartment along the firewall with the PDC for aux switches next to the coolant reservoir also at the firewall.There were no fuses or relays in the fuse box for the aux locations and the fuses don't sit in the box well they just slip in and out very loosely.
It dose not feel like any thing in the fuse box is catching so do not think so. I pulled out a couple of the other fuses in the box and they catch but not the ones I installedThe block on driver-side near the cooloant reservoir is for the relays. I think the OP is at the fuse box by the battery.
Are there female connectors in the fuse slots? I'm sure you know which fuses to use, but there isn't much nformation to go on.
Where did you ground?
Yes the battery connected to the auto on off needs to be checked and I have read a number of post about it blowing when the negative connection next to the battery is disconnected.Oh... and not to be a wise guy... are they connected to the battery?
main battery is connected!Yes the battery connected to the auto on off needs to be checked and I have read a number of post about it blowing when the negative connection next to the battery is disconnected.
grounded next to battery on the 3rd boltThe block on driver-side near the cooloant reservoir is for the relays. I think the OP is at the fuse box by the battery.
Are there female connectors in the fuse slots? I'm sure you know which fuses to use, but there isn't much nformation to go on.
Where did you ground?