RIP11
Well-Known Member
finally put an order in at RIVER OAKS JEEP in Houston. Solid deal and OUTSTANDING service. i highly recommend going and talking to Mark Gusman there.
Sponsored
I'd be curious to what you hear back from Kernersville or North Point. I'll likely order from Kernersville next weekend if their quote is still the same as last month. They are $400 more than Koons but it's worth it to not have to drive and deal with the local dealer. Make sure you mention Tread Lightly there. They quoted me an additional $850 off using it. They wouldn't be competitive without it. North Point will give $500 and seems to want my business more and are real easy to deal with. They are $250 higher than Kernersville. I'm sure they'd match. I'll go with Kernersville since they are a few miles closer but if something doesn't feel right I'll go to North Point.I'm looking now. I'll let you know what I find. I am talking to Steve White Motors in Hickory. They were recommended by a couple of the members.
I am also waiting for a call back from Kernersville. I am also contacting Northpoint in Winston-Salem and a few dealers in the Triangle.
i haven't gotten a quote yet from North Point. Kernersville came in high on their first quote but they are working on getting it lower.I'd be curious to what you hear back from Kernersville or North Point. I'll likely order from Kernersville next weekend if their quote is still the same as last month. They are $400 more than Koons but it's worth it to not have to drive and deal with the local dealer. Make sure you mention Tread Lightly there. They quoted me an additional $850 off using it. They wouldn't be competitive without it. North Point will give $500 and seems to want my business more and are real easy to deal with. They are $250 higher than Kernersville. I'm sure they'd match. I'll go with Kernersville since they are a few miles closer but if something doesn't feel right I'll go to North Point.
They started at 1% below invoice. Then went to around 3% but with the Tread Lightly discount they are closer to 4.5%i haven't gotten a quote yet from North Point. Kernersville came in high on their first quote but they are working on getting it lower.
YesGood deal?
Great deal 6% under invoice did u buy that from Tyson ?
Anyone see any red flags or anything off in the build?
Haven't purchased yet - this is just a quote for now; I want to make sure the dealer I'm working with is comfortable with me sharing the info before I say yes or no either way.Great deal 6% under invoice did u buy that from Tyson ?
I paid 175 for Doc fee and 145 to transfer plates , looks like same deal I got , I haven’t seen anyone beat that deal on hereHaven't purchased yet - this is just a quote for now; I want to make sure the dealer I'm working with is comfortable with me sharing the info before I say yes or no either way.
The 6% under is good, yes - I'm hoping for feedback on doc fees/wheel locks for $199/overall build/etc...
Thanks for the feedback!I paid 175 for Doc fee and 145 to transfer plates , looks like same deal I got , I haven’t seen anyone beat that deal on here
Your build is indentical to mine accept I got a Rubicon , I also put 1000 down I assume it’s normal , I think you have a great deal and great build !!!Thanks for the feedback!
Is a $1,000 deposit normal for factory orders? I thought I had paid a $500 hold on a credit card last time that was then refunded...
Also - any glaring misses in my build? The use of the vehicle is daily driver in Ohio, wife may also be driving it occasionally (Selec-Trac) and it will be hauling two little ones in car seats.
Your build is indentical to mine accept I got a Rubicon , I also put 1000 down I assume it’s normal , I think you have a great deal and great build !!!
Yes I think with a family your probably better off with Sahara , I probably won’t off road mine either but I love the look with the fenders and steel bumper, Sahara and Rubicon are both awesome looking jeeps inside and out !Awesome, thanks for the feedback!
Like the fenders on the Rubi, but I won’t be offroad enough to use the other features.
I would have gone Rubi just to have a Rubi (dumb, I know), but I really wanted Selec-Trac and that’s only available on Sahara.
Not to mention I'm putting a big chunk down as well.