What did you do TO your Jeep JL today?

[Brew211]

Well finally got my Atlas steps on.
I went to a local body shop. They said getting those bolts out was a chore.

For anyone else interested in these, it was actually very easy. One medium tap with a mallet on the T50 ratchet adaptor, a 24" breaker bar and it snaps free. It honestly took me about 5 minutes per step.

Sponsored

 

[lightsout]

Had Pixel Decals do a custom hood sticker Black on Black. I also just had the wrangler wrapped in 3M it is so glossy now hard to take a picture, however the flat black sticker is perfect not to pronounced. I have also blacked out the badging,

 

[TJ2018]

Had Pixel Decals do a custom hood sticker Black on Black. I also just had the wrangler wrapped in 3M it is so glossy now hard to take a picture, however the flat black sticker is perfect not to pronounced. I have also blacked out the badging,

Very sharp looking! Love the black on black!

 

[JL FTWORTH]

Got the Mopar 2" lift that gave me right at 3". Also got the JKS quicker disconnect sway bars. Everything looks and works great but I'm still trying to figure out how to secure it to the retention bracket since it's so far away. Guess I can use zip ties if I can't use the bracket.

All ready to go out to the Hot Spring ORV park this Sunday!

 

[JimLee]

Yes, 95 Db. Except for motorcycles... Which is why ? Noise is noise...

California is home to 10 zillion poser bikers with "loud pipes save lives" stickers on their DOT approved skull buckets is why.

 

[JimLee]

Got the Mopar 2" lift that gave me right at 3". Also got the JKS quicker disconnect sway bars. Everything looks and works great but I'm still trying to figure out how to secure it to the retention bracket since it's so far away. Guess I can use zip ties if I can't use the bracket.

All ready to go out to the Hot Spring ORV park this Sunday!

With three inches of lift your disconnects should be adjusted longer, much longer. The way you are now at full front end extension with your swaybar connected it can flip (under), which is bad news. That's also probably why you are not reaching the bracket.

 

[JL FTWORTH]

With three inches of lift your disconnects should be adjusted longer, much longer. The way you are now at full front end extension with your swaybar connected it will flip (under), which is bad news. That's also probably why you are not reaching the bracket.

Thanks for the help,
Will this be a problem while it is connected driving normal or just a problem while it is disconnected?
Sorry I am new to all of this.

 

[JimLee]

Thanks for the help,
Will this be a problem while it is connected driving normal or just a problem while it is disconnected?
Sorry I am new to all of this.

No problem, happy to help. Shouldn't be a problem with normal driving unless you hit a huge hole. Off road it would only be a problem if left connected and then only in a particular type of situation, disconnected you are still good.

 

[JL FTWORTH]

No problem, happy to help. Shouldn't be a problem with normal driving unless you hit a huge hole. Off road it would only be a problem if left connected and then only in a particular type of situation, disconnected you are still good.

Awesome thanks, I'll take it back in after my trip to Arkansas this weekend.

 

[JimLee]

Thanks for the help,
Will this be a problem while it is connected driving normal or just a problem while it is disconnected?
Sorry I am new to all of this.

Adjust them so that your sway bar is at least 5 degrees above horizontal when connected, i personally go further, some people say it should be the same # of inches above horizontal as the lift at the sway bar end but I don't think ot has to be that far. Also, when you are disconnected on both sides you should be able to push the sway bar up by hand, it'll be stiff, and reach your retaining mounts.

 

[bem1]

My friend and I took our Jeeps out to Big Bend National Park and did one of the Jeep "Badge of Honor" trails. It was a really easy trail, did all but one obstacle in 2wd, but it was worth it overall.

This is on my todo list later this Summer. Can't wait as I love Big Bend!

 

[JeepSmash]

the idea is that motorcycles are too often unnoticed by drivers in cars, and allowing them to be loud would capture the attention of drivers to improved safety for motorcycle riders.

You mean the ones that flip everyone off while illegally lane splitting at 75 mph?

 

[JimLee]

Awesome thanks, I'll take it back in after my trip to Arkansas this weekend.

If you have problems getting one side reconnected after wheeling, driving the affected sides front wheel up on a rock (after connecting the other side) is your friend. Enjoy your trip!

 

[Killed by Death]

Installed Tuffy Security Tailgate...Installation instructions kinda suck but I was also a dumbass...Took about 45 minutes because I didn't drill pilot holes...I know better!!!!

Easy 10 minute job for 2 people with good instructions (DRILL PILOT HOLES).

Solid Unit but seam gaps could be better and powder coat is jankie in a few spots (But I'm picky).

Overall very happy and would buy again.

 

[Roky]

Installed Tuffy Security Tailgate...Installation instructions kinda suck but I was also a dumbass...Took about 45 minutes because I didn't drill pilot holes...I know better!!!!

Easy 10 minute job for 2 people with good instructions (DRILL PILOT HOLES).

Solid Unit but seam gaps could be better and powder coat is jankie in a few spots (But I'm picky).

Overall very happy and would buy again.

Looks great!.... is there a vent on it somewhere, the vent for closing your doors is in the tailgate so you don’t blow out your eardrums when shutting the doors.. lol.... ​

Sponsored