Did you receive your Jeep Wave info in the mail after signing up? My dealership didn't even mention it to me. Had to find it and sign up on my own. But I haven't received anything yet and it's been about a month.
Its from dominion offroad off jeep swag. https://www.jeepswag.com/shop/shop/...l-4-door-hi-lift-jack-mount-kit-2018-jeep-jl/
Seems to have automatically enrolled me. The Jeep wave
Any suggestions on how I can extend my backup camera? I put on 18x9 with +1 offset Fuel Assault wheels with 285/70/18 Ridge Grapplers. And we lost a little of the view on the camera b/c it doesn't extend far enough.
Where the stubby pics?TODAY...I got a Rubicon Bumper installed on my Sport! Yes...you are seeing these pics correctly...those Tow Hooks are painted Mojito!
THANK YOU!!!! @TTEChris @ Tank Customs!
@BlairF @Pic18
Have you noticed a difference in temperature or noise difference with the hothead headliners? Also is the hothead headliners fabric able to have velcro attached to it? I want to be able to velcro patches of where i've traveled to the headliners. Thanks!Yesterday I installed my Hothead Headliners, which are working well so far and an easy install, though worth taking the time to do it properly.
Today I Plasti Dipped the Jeep and Trail Rated badges and added a set of 6 GPCA Tie-down D-Plates for extra cargo attachment points.
i didn't like! I'll text you pic he sent me with the "wing" on and the other side lookin stubby!
Yesterday I installed my Hothead Headliners, which are working well so far and an easy install, though worth taking the time to do it properly.
Today I Plasti Dipped the Jeep and Trail Rated badges and added a set of 6 GPCA Tie-down D-Plates for extra cargo attachment points.
It hasn't been as hot over here since I installed it, hovering around 97F so haven't experienced it at hight temps yet, but in the high 90's the difference between touching the bare inner roof with or without the Headliner is pronounced (after letting the Jeep sit in the sun for a while.
) but the fabric does feel the same as material I have attached things too and my assumption is that you could. I'd ask Hothead Headliners (the link is in my post above), they're really good at responding to questions and they're also on here.
Yea... stealth mode.... have thought of the locks but assume I'll use they key (!) at least a few times over time so might skip it.Very easy to do btw, just make sure you apply thin coats to start with and ideally coat around 12 times for best results.
Unfortunately due to how the camera is mounted in the housing I don't see a way to extend it without going to an aftermarket carrier. I had to cut/modify my camera housing to fit with my bumper/tire carrier which allowed it to sit further out, but I don't think you could do the same if you are still using the factory carrier.
