What did you do TO your Jeep JL today?

[Yldman]

LOL!!!

Sponsored

 

[TTEChris]

How many lifts are you going to put on your Jeep?

How did the accuracy change on the backup camera moving it up with the larger tire?

Does that bumper support the proximity sensors?

Probably 5+ different suspension setups like my first JK
Backup camera is actually a little better since it sits a little further out with the high offset beadlocks. Spare is about the same height, so no issue there. My bumper doesn't have the backup sensors(didn't order that package.) I'm not sure if ROAM will be offering an option for those with promimity sensors.
I love the bumper with my heavy ass wheel/tire combo. Sits close to the body, and with the three "pressure" points it feels very secure with very little movement.

 

[Gooseisdead]

FINALLY! I get to see what car seats look like in a JL mine is still in D1 status, I have 2 kids one uses a booster and one uses a front facing seat just like yours. I stupidly forgot to check when I went for a test drive to see how they fit. I've been looking everywhere for reviews. How does it fit with someone sitting in the middle with both seats installed? My 9 year doesn't need a car seat anymore so he has to be in the middle.

Oh and to stay on topic. I didn't do anything to my JLU but continue to wait for delivery.... =(

Been a while since I posted that pic. Happy to help.
No issues with the car seat setup at all. Besides my daughter kicking my seat but that’s more of a kid issue . The middle between the two seat is kind of tight but I have had an adult ride back there a few times with not too much complaining. It should be fine for a kid. Hope you can see for yourself very soon.

 

[FalKor JLU]

I ordered a .50 cal bullet antenna on Amazon. The company sent me a Jackie Chan movie instead! I was like...

Classic Amazon

 

[Jeepmarkjl]

Sometimes it’s the smallest things

So these come with the Rubicon? How can I get these for my Sahara which did not? I can see how useful they would be.

 

[Rad vlad]

So these come with the Rubicon? How can I get these for my Sahara which did not? I can see how useful they would be.

Amazon quick connector the bolts don’t work on the JL But for 13 dollars the d rings were worth it to me

 

[FatBoy01]

So these come with the Rubicon? How can I get these for my Sahara which did not? I can see how useful they would be.

I go a set here. $9.99 for 8. Quality is real nice. Often the ones from China are iffy. Again, these are really decent:
https://www.amazon.com/gp/product/B076SCRTTJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

[DickZip]

Finished installing my ROAM rear bumper and extending my camera/third brake light harness. Also had my 3.5-4" Skyjacker kit delivered today.

I'd like to see more photos of your roam bumper and tire carrier, can you show it while open, license plate mount, locking Handel, backside of carrier and any other you think are important. Considering this combo but can't find detailed photos, the website has poor photos too. I feel if your going to sell parts the mfg has to post on their site detailed photos. Thanks

 

[Jeepmarkjl]

I go a set here. $9.99 for 8. Quality is real nice. Often the ones from China are iffy. Again, these are really decent:
https://www.amazon.com/gp/product/B076SCRTTJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Thank you. Its early in the am and looking this up on Amazon did not occur to me pre-Coffee.

 

[FatBoy01]

Thank you. Its early in the am and looking this up on Amazon did not occur to me pre-Coffee.

There are many offerings of this type of D-ring on Amazon. Careful....Some of those offered are very poor. Weak metal, bends bad, paint bad. The ones I linked to at are really decent. Well worth the $9.99 which includes free Prime shipping.

 

[ward1design]

2" Mopar lift and 35s

looks great!

 

[J.R. Quimby]

looks great!

Thanks. I opted to keep the 17s because I'm a big fan of the more tire less wheel look Someday when Puddle Jumper is older and JL aftermarket parts are as ubiquitous as JK parts are now, I may go all out with that theme

 

[ward1design]

Thanks. I opted to keep the 17s because I'm a big fan of the more tire less wheel look Someday when Puddle Jumper is older and JL aftermarket parts are as ubiquitous as JK parts are now, I may go all out with that theme

totally get that.....and agree, we need more parts available now! :cwl:

 

[crik]

Amazon quick connector the bolts don’t work on the JL But for 13 dollars the d rings were worth it to me

Do you know what size bolts fit in the JL? (Same issue, quick connectors don't work in the JL.) I got the premium soft top, so don't have any bolts to go in those fittings in the back.

 

[TTEChris]

I'd like to see more photos of your roam bumper and tire carrier, can you show it while open, license plate mount, locking Handel, backside of carrier and any other you think are important. Considering this combo but can't find detailed photos, the website has poor photos too. I feel if your going to sell parts the mfg has to post on their site detailed photos. Thanks

I took better/more detailed pictures today.
I swapped the included licence plate bracket/light for some "lighted bolts." The bracket put the plate at more of a straight straight angle, but I prefered the flush look of it directly on the bumper. I mounted them in the holes where the bracket usually goes(Same bolt pattern as the plate, so no drilling of holes needed.)

Sponsored