Trackbar Product Selection Advice and Voting.

[SleepEatJeepRepeat]

Just bought the teraflex front track bar from @River City Offroad , using there Black Friday deal was able to get it for under 250 after tax and delivery, thank you all for your advice and input

Sponsored

 

[word302]

Struggling to find a quality rear trackbar with rubber bushing, anyone have recommendations? Was told by my favorite shop that metalcloak and evo are kind of light and not robust.

Lol. It sounds like your shop has a brand bias.

 

[word302]

PPS: Here's a pic that Gabie at Teraflex sent me of a Falcon 2.2 with the JK bracket on a JL.

I don't think your 1 5/8" clamp will work with the synergy tie rod. They are smaller.

 

[Chipe]

Lol. It sounds like your shop has a brand bias.

I have Synergy and like it, but both of those others are robust as well.

 

[Chipe]

I don't think your 1 5/8" clamp will work with the synergy tie rod. They are smaller.

They are 1.5", so they sent me the 1 3/8 clamp and I'm getting it milled out to 1.5"

 

[quietpeen]

Just bought the teraflex front track bar from @River City Offroad , using there Black Friday deal was able to get it for under 250 after tax and delivery, thank you all for your advice and input

I’m so close to pulling the trigger on the teraflex from northridge4x4 $246.49 Shipped but like my last couple of posts show i”m worried about it contacting my steering stabilizer.

 

[word302]

I’m so close to pulling the trigger on the teraflex from northridge4x4 $246.49 Shipped but like my last couple of posts show i”m worried about it contacting my steering stabilizer.

Get the Rock Krawler. Lifetime warranty and no pinch bolts to get in the way.

 

[SleepEatJeepRepeat]

I have Synergy and like it, but both of those others are robust as well.

the synergy looks awesome, but I want avoid poly bushings, I know they have a Teflon layer or something to avoid noise.. but felt safer with a rubber bushing .. I might reach out to teraflex and see if they will give me an eta for the rear trackbar @TeraFlex

 

[quietpeen]

Get the Rock Krawler. Lifetime warranty and no pinch bolts to get in the way.

I’m not against Rock Krawler or jamb nuts, but because I will be installing myself and then installing my 2.5” spacer lift, then later a spring lift, I feel I want a track bar that is adjustable on the jeep so I don’t have to keep taking it off for adjustments.

 

[word302]

I’m not against Rock Krawler or jamb nuts, but because I will be installing myself and then installing my 2.5” spacer lift, then later a spring lift, I feel I want a track bar that is adjustable on the jeep so I don’t have to keep taking it off for adjustments.

It takes about 2 minutes to remove it.

 

[SleepEatJeepRepeat]

Bought the metal cloak rear, the solid chromolly with the rubber bushing just sounded like the best combo for the rear..

 

[word302]

Bought the metal cloak rear, the solid chromolly with the rubber bushing just sounded like the best combo for the rear..

Excellent choice.

 

[SleepEatJeepRepeat]

Excellent choice.

your wisdom helped me lol

 

[quietpeen]

Just bought the teraflex front track bar from @River City Offroad , using there Black Friday deal was able to get it for under 250 after tax and delivery, thank you all for your advice and input

did you get this yet? any installed pics if so?

 

[SleepEatJeepRepeat]

It arrives today, probably install it friday, but might try to do it sooner

Sponsored