TPMS swap - frequency compatibility question

[SmokyMtnsJeepGirl]

Hello!
I have a '21 JLU Sahara with stock wheels and TPMS sensors. I'd like to buy some take-off '25 JLU stock Sahara wheels. The owner of the '25 wheels removed the TPMS sensors to put on his new wheels.
I know there was a frequency change with the JL TPMS sensors right around my '21 mid-year build date.
Since the '25 wheels have had their sensors removed, can I simply put in my '21 sensors and everything be compatible and communicate correctly related to the different wheels and frequency issue?

Sponsored

 

[Terrymo]

Hello!
I have a '21 JLU Sahara with stock wheels and TPMS sensors. I'd like to buy some take-off '25 JLU stock Sahara wheels. The owner of the '25 wheels removed the TPMS sensors to put on his new wheels.
I know there was a frequency change with the JL TPMS sensors right around my '21 mid-year build date.
Since the '25 wheels have had their sensors removed, can I simply put in my '21 sensors and everything be compatible and communicate correctly related to the different wheels and frequency issue?

Assuming your existing sensors are in good condition they will continue to function correctly in the new wheels

 

[SmokyMtnsJeepGirl]

Assuming your existing sensors are in good condition they will continue to function correctly in the new wheels

Yep! Functioning just fine!
Forgot to ask if there is a sensor size issue with the new wheels - are all sensors for JLs the same size?
Another question... how difficult will it be to remove the sensors from my '21 and install them in the new wheels? And can somewhere like Firestone do it? I hope it won't cost a fortune

 

[Terrymo]

Yep! Functioning just fine!
Forgot to ask if there is a sensor size issue with the new wheels - are all sensors for JLs the same size?
Another question... how difficult will it be to remove the sensors from my '21 and install them in the new wheels? And can somewhere like Firestone do it? I hope it won't cost a fortune

It will be a routine swap for any tire shop with no issues. They attach to the valve stem inside of the wheel with a screw. Here is a pic as an example although not your exact setup.

 

[SmokyMtnsJeepGirl]

It will be a routine swap for any tire shop with no issues. They attach to the valve stem inside of the wheel with a screw. Here is a pic as an example although not your exact setup.

Thank you so much! This is very helpful! I am NOT mechanically minded - lol! But I'm learning so much here on the forum by reading all of the posts!

 

[2nd 392]

They screw onto the valve stems, make sure you have the right ones. My new wheels came with non TPMS stems and I ended up with what the tire shop had, a little longer than wanted.

 

[Terrymo]

Thank you so much! This is very helpful! I am NOT mechanically minded - lol! But I'm learning so much here on the forum by reading all of the posts!

No problem. If you are curious and wanting to learn you qualify as mechanically minded in my opinion,

 

[SmokyMtnsJeepGirl]

No problem. If you are curious and wanting to learn you qualify as mechanically minded in my opinion,

Thank you! I am feeling more confident and believe that you should never stop trying to learn!

 

[SmokyMtnsJeepGirl]

They screw onto the valve stems, make sure you have the right ones. My new wheels came with non TPMS stems and I ended up with what the tire shop had, a little longer than wanted.

Thank you for this tip! More great info and knowledge!

Sponsored