SOMEONE IS SKETCHY HERE

[cmdonnell]

So what you're implying is That this "Tool"
https://www.jlwranglerforums.com/fo...sticker-and-build-sheet-order-tracking.12503/
Is completely inaccurate, and behind in the process???

For what it's worth that tool isn't anything developed by Jeep. It's an online app that someone made to scour information from public sources.

For slightly more accurate information you need to engage in Jeep Chat where you have to have a mild conversation with someone and they give you a paraphrased status. As far as I know the information they have should be similar to what a dealer would see.

Sponsored

 

[SFDemo]

My Jeep was built and sitting on the train before the tracker updated.
I wouldn’t rely on the tracker so much.
My salesman has been spot on with the statuses he’s given me so far.

My Jeep was actually delivered and being driven by me before the tracker was updated and my salesman was spot on and had more info than anyone else.
I ordered 08/09 and received 09/24, only 1 day after dealer had told me about a week and a half prior. It does help to live an hour and a half from the factory for delivery

 

[kblak064]

That tool didn't kick out my window sticker until 2 full days after build was totally complete. As noted by others it will not produce the window sticker right on schedule and sometimes it's really delayed. Why don't you just reach out to Jeep Chat and see what stage they say its in? It should show in their system as the same stage (Trim) as the dealer sees since they have the same info as Jeep chat AND much more.

I took your advice, and did just that. The dealer information is accurate according to "Jeep Chat".

 

[tampahoosier]

I took your advice, and did just that. The dealer information is accurate according to "Jeep Chat".

Awesome! You're all set then. Once the Jeep ships Jeep Chat will cease with any relevant information. You will have to reach out to your dealer for train info and ramp eta dates. FYI I would take the initial ramp ETA dates with a grain of salt. My experience in my last two special orders were the ramp ETAs during the first week of train shipment were off.

 

[openingshok]

Cryptostickers was completely inaccurate for my 4xe's build. Here's my timeline:
7/29 - Placed order with dealer
8/20 - Dealer texts and says mine should be built around 8/25 and could be at the lot by 8/27
8/27 @ 4am - Get email that the build sheet was found, indicating they're about to start building it
8/27 @ 4pm - Dealer calls and says they just pulled my 4xe off the truck on their lot and it'll be ready in the morning.
8/28 - Picked up 4xe, looked at the MDH code on the Jeep and it indicated it was built on 8/25 @ 2pm. So my Jeep was built for 38 hours before it showed on cryptostickers.
8/31 - Get email that the Window Sticker was found on cryptostickers

The problem with that tool is that it's reliant on someone updating the data, and they're doing it but not timely.

WOW. You got yours from ordered to delivered in 4 weeks? Didn't know that was a thing these days!!!

 

[300K06TJ]

Sure have, and that would be pertinent if the entire assembly line was shut down, and producing nothing. That's not what this is. There are still wranglers of all kinds still being built, and leaving Ohio, but thanks for participating anyway.

Wow. You need to lighten up a bit! You're getting a Wrangler! It will get there soon enough, and no one is more anxious for you to get it than you and your salesperson.
The Jeep gets built, it gets stored until shipped, then it arrives. There are worker shortages restricting transport drivers. There are vehicles being built waiting for chips. There are worker shortages at suppliers, vendors, and trim shops. There are many possible delays after production. Glad I'm not your dealer, sounds like they might have a rough go of it.

 

[abecker]

It sounds like you are using the tool on here incorrectly. The tool on here will let you know when you build sheet is available and when your window sticker is available. It won't update you at every status change. Typically the build sheet will be available once the factory has finished building the Jeep and it either goes to shipping or off to the body vendor for accessories. The window sticker will show up around the time it is released to shipping, but could take a day or three to be available.

 

[mcjeff]

Though that said, the tool does have an update cadence and not everything shows up right away. For example, it shows no build sheet for my build, but if I go directly to the Jeep site, I can see it:

https://www.jeep.com/webselfservice/BuildSheetServlet?vin=<Your VIN Here>

Here's a handy little form you can use that will populate all of that for you (yes, it says RAM, it will still work):

https://fcacommunity.force.com/RAM/s/equipment-listing

 

[kblak064]

Wow. You need to lighten up a bit! You're getting a Wrangler! It will get there soon enough, and no one is more anxious for you to get it than you and your salesperson.
The Jeep gets built, it gets stored until shipped, then it arrives. There are worker shortages restricting transport drivers. There are vehicles being built waiting for chips. There are worker shortages at suppliers, vendors, and trim shops. There are many possible delays after production. Glad I'm not your dealer, sounds like they might have a rough go of it.

Nothing heavy about the post or thread that I need to "lighten up about". Simply pointed out that the wrangler build tracking tool isn't that at all. It doesn't track the build in real time, and it's a little misleading. I'm sure my dealer is thrilled to death that I'm purchasing this vehicle. Too bad if I'm enthusiastic about this purchase, and I'm well aware of all the things that have befallen the country. That said it's a post, and a thread. Nothing I said was over the top, so how about you "lighten up". I'm glad you're not my dealer as well.

 

[FloridaLarry]

So I ordered a New Rubicon 4XE 8/5/21.
For the longest while it's been in D, then D 1 status. On the Window sticker build thread I've been tracking it, and it hasn't moved an inch. It's only indicated it's been ordered. The dealership has informed as of this posting that it's in "G" status now which according to them, it's the Trim stage. Someone is full of BS, and I'm unsure which party it is????

FWIW, I order my Rubicon 4xe the day before you (8/4) and it was at the dealer (9/20). Here is the log:

08/04/2021 - Order placed
08/04/2021 - VON received
08/07/2021 - D status, VIN received
08/19/2021 - D1 status (est ship: 8/27)
08/24/2021 - Build sheet avail
08/25/2021 - JB status
09/01/2021 - KZ L (waiting in yard for rail)
09/07/2021 - KZ L (waiting in yard for rail)
09/16/2021 - KZ R (in transit, half way to me! 3 days to go!!!!)
09/20/2021 - Arrived at dealer!

What I ordered is in my sig. Any delays are probably something in your config.

 

[kblak064]

FWIW, I order my Rubicon 4xe the day before you (8/4) and it was at the dealer (9/20). Here is the log:

08/04/2021 - Order placed
08/04/2021 - VON received
08/07/2021 - D status, VIN received
08/19/2021 - D1 status (est ship: 8/27)
08/24/2021 - Build sheet avail
08/25/2021 - JB status
09/01/2021 - KZ L (waiting in yard for rail)
09/07/2021 - KZ L (waiting in yard for rail)
09/16/2021 - KZ R (in transit, half way to me! 3 days to go!!!!)
09/20/2021 - Arrived at dealer!

What I ordered is in my sig. Any delays are probably something in your config.

Mine is finally built, out to the vendor for options I chose. Hoping to have it by end of month. ??‍

Sponsored