Show us your CUSTOM MODS!!

[Titan2727]

What size shrink tube did you buy?

I'll bought a ton actually. It's relatively cheap. I bought 2 feet of each size all the way up to 2". Have used it on a bunch of different things stuff is awesome

Sponsored

 

[Titan2727]

Plugs for the spare tire holes!!! Just need to paint the countersink with some black touch up paint. Also have perfect size for Mopar a-pillar holes located on side of mount. It's the simplest things that add that unique custom look, total win!!!

https://www.amazon.com/dp/B078KF982T/ref=cm_sw_r_cp_apa_Q42VBb6QT144Z

 

[American Jeeper]

There’s a few custom mods here:

 

[Titan2727]

Used that heat shrink tubing to cover the anti-kink springs on air lines for my onboard ARB. Looks awesome and wont scratch anything!!!

 

[Titan2727]

Used that heat shrink tubing to cover the anti-kink springs on air lines for my onboard ARB. Looks awesome and wont scratch anything!!!

You gotta get some of this stuff..was thinking of using it on the mopar lug locks to match the black lugs. I'll try and post some picks

 

[Titan2727]

Put an inline reg on the line and fully open(max psi) it reads output is 40(ish)psi...that's it??

...or is the regulator even though wide open restricting flow?

 

[paulr]

Little sneak preview.... just got my red seatbelts back today. They're going in this coming week, will update with pics!

 

[Titan2727]

Little sneak preview.... just got my red seatbelts back today. They're going in this coming week, will update with pics!

Need to tell me how??!!

 

[paulr]

Need to tell me how??!!

purchased a brand new set of seatbelts from the dealer and sent them off to be re-webbed in red! miss my red recon ones too much to give up this mod on the JL, plus it matches the JLs interior perfectly with all the red accents

 

[Titan2727]

purchased a brand new set of seatbelts from the dealer and sent them off to be re-webbed in red! miss my red recon ones too much to give up this mod on the JL, plus it matches the JLs interior perfectly with all the red accents

Any company to reference? I want these badly..shit, I'll send the stuff to you or you can make for me and I'll send you a check if want

 

[paulr]

Any company to reference? I want these badly..shit, I'll send the stuff to you or you can make for me and I'll send you a check if want

PM sent with info

 

[Titan2727]

PM sent with info

You the man!!! Thanks

 

[James]

Hey folks

I’ll post a few things I did. Here is the first one
In this post I built a aluminum cabinet system that can be lifted up by way of help of gas springs. The drawers are on roller bearings. I can remove the entire set up within 20 minutes.
It works great for the overland stuff I’m doing

 

[James]

Here is another mod

I installed a Baja design rock light to the back window. I grabbed the power from the cigarette lighter plug. The amount of light is perfect

 

[Titan2727]

Hey folks

I’ll post a few things I did. Here is the first one
In this post I built a aluminum cabinet system that can be lifted up by way of help of gas springs. The drawers are on roller bearings. I can remove the entire set up within 20 minutes.
It works great for the overland stuff I’m doing

Only thing most Jeeps dont have are kitchens

Well, you apparently covered that!!
Looks AWESOME!!!! JOB VERY WELL DONE

Sponsored