Sponsored

Samson Build

Lurvis33

Well-Known Member
First Name
Luke
Joined
Dec 1, 2017
Threads
12
Messages
1,585
Reaction score
6,237
Location
Lewisville, TX
Vehicle(s)
‘18 Sting-Gray Sahara
Vehicle Showcase
1
I had been loosely following these threads since last March and finally became a member in October when I finally wanted to start putting in input. When I saw the colors leaked I knew I wanted to wait for Sting-Gray. So I was finally able to order at the end of February and "Samson" finally arrived in May.
BC43C24E-8E35-45E0-A0C0-2568C4D09EBA.jpeg


Some of the first mods I added right off the bat were the T-Rex Window Sticker, 15" Rugged Ridge Antenna, and a Film Texas Sticker I got from a convention.
0E1D532D-DBD1-4F6B-8CAF-4F22510AF866.jpeg
1996FBFE-8CFB-40C0-9303-1C2048B8C30D.jpeg
6D1ED5D4-8D7F-4248-8199-321691E22BE7.jpeg


I also purchased the 1941 Hood Decal when I ordered the Jeep and had it applied the morning before my Rims arrived.
319807B2-7ADA-4BB3-89CC-84B53BE09D1C.jpeg

4977BC40-54E5-4FE5-A4A5-08449C0FAB2D.jpeg


While I was waiting for the Jeep, I found some Rubi KO2 take-offs from the forum and I pulled the trigger on the 17" Bronze Method Roost's that I had been eyeballing for a while.
B152B68E-E02A-4402-A3E8-9347FD26F140.jpeg
D46BEEEC-C450-4869-863F-EE5B5B460B2B.jpeg


For Memorial Day Weekend I was able to finally put on my JTopsUSA Wavy Texas Flag and take the doors off. I put in the the Barricade Circle Mirrors to still be able to see surrounding traffic.
2F8F6291-8EB8-46FC-876E-51A1F9BE57EA.jpeg
4E89383E-ABFE-43BC-AF51-92409BB148AE.jpeg


Another weekend I was able to install the 4 Piece LEDGlow kit and my custom "Strength of Samson" decal from Pixel Decals. The key is to make sure you install the back led's in the right spot or else you'll crush the plastic like I did on the back right side...:facepalm: (Still works though, just lost 3 of the nodes.)
B329AE34-B958-4799-A841-9639313388D3.jpeg

47702363-DD33-4CD2-AF38-E4CDA08FE300.jpeg


For 4th of July I purchased a hitch flag pole holder and made a flag pole out of a 2" PVC pipe. The key is to buy a flag made for high winds.
088A929F-0CDA-4B05-9A2C-58A65762F596.jpeg
83A2C528-5740-49FC-A50E-9E8D64FDECAE.jpeg


Just recently I put the Reflective Black JL Jeep Wave Decal from Pixel Decals on the driver side mirror.
1465F601-643A-4DD4-A067-5F2C78351D69.jpeg
800E29A1-E964-43EA-83CA-D0D5FB32BF03.jpeg
Sponsored

 
Last edited:

eder214

Well-Known Member
First Name
Eder
Joined
Dec 14, 2017
Threads
14
Messages
187
Reaction score
91
Location
Dallas
Vehicle(s)
2018 Mojito JLUR
Vehicle Showcase
1
I had been loosely following these threads since last March and finally became a member in October when I finally wanted to start putting in input. When I saw the colors leaked I knew I wanted to wait for Sting-Gray. So I was finally able to order at the end of February and "Samson" finally arrived in May.
BC43C24E-8E35-45E0-A0C0-2568C4D09EBA.jpeg


Some of the first mods I added right off the bat were the T-Rex Window Sticker, 15" Rugged Ridge Antenna, and a Film Texas Sticker I got from a convention.
0E1D532D-DBD1-4F6B-8CAF-4F22510AF866.jpeg
1996FBFE-8CFB-40C0-9303-1C2048B8C30D.jpeg
6D1ED5D4-8D7F-4248-8199-321691E22BE7.jpeg


I also purchased the 1941 Hood Decal when I ordered the Jeep and had it applied the morning before my Rims arrived.
319807B2-7ADA-4BB3-89CC-84B53BE09D1C.jpeg

4977BC40-54E5-4FE5-A4A5-08449C0FAB2D.jpeg


While I was waiting for the Jeep, I found some Rubi KO2 take-offs from the forum and I pulled the trigger on the 17" Bronze Method Roost's that I had been eyeballing for a while.
B152B68E-E02A-4402-A3E8-9347FD26F140.jpeg
D46BEEEC-C450-4869-863F-EE5B5B460B2B.jpeg


For Memorial Day Weekend I was able to finally put on my JTopsUSA Wavy Texas Flag and take the doors off. I put in the the Barricade Circle Mirrors to still be able to see surrounding traffic.
2F8F6291-8EB8-46FC-876E-51A1F9BE57EA.jpeg
4E89383E-ABFE-43BC-AF51-92409BB148AE.jpeg


Another weekend I was able to install the 4 Piece LEDGlow kit and my custom "Strength of Samson" decal from Pixel Decals. The key is to make sure you install the back led's in the right spot or else you'll crush the plastic like I did on the back right side...:facepalm: (Still works though, just lost 3 of the nodes.)
B329AE34-B958-4799-A841-9639313388D3.jpeg

47702363-DD33-4CD2-AF38-E4CDA08FE300.jpeg


For 4th of July I purchased a hitch flag pole holder and made a flag pole out of a 2" PVC pipe. The key is to buy a flag made for high winds.
088A929F-0CDA-4B05-9A2C-58A65762F596.jpeg
83A2C528-5740-49FC-A50E-9E8D64FDECAE.jpeg


Just recently I put the Reflective Black JL Jeep Wave Decal from Pixel Decals on the driver side mirror.
1465F601-643A-4DD4-A067-5F2C78351D69.jpeg
800E29A1-E964-43EA-83CA-D0D5FB32BF03.jpeg
Which antenna did you get? Any notice on reception getting worse?
 

eder214

Well-Known Member
First Name
Eder
Joined
Dec 14, 2017
Threads
14
Messages
187
Reaction score
91
Location
Dallas
Vehicle(s)
2018 Mojito JLUR
Vehicle Showcase
1
I have it linked in the word itself. It sounds like Factory with no loss in reception :like:
I don't know how I miss it. Thank you I been looking to buy a shorter antenna I was just worried about lower reception.
Sponsored

 
 



Top