Rangemaster
Well-Known Member
Sponsored
Sponsored
RPM Steering
- Thread starter 19 JLUR Bright Whit3
- Start date
- Watchers 3
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #32
We had an odd 70 degree day today in NJ. It gave me a chance to put on the RPM tie rod. This thing is stout! I couldnt find my pickle fork for the pitman arm so I didnt even attempt the drag link. Its supposed to be another warm day tomorrow, but rain is possible. I like this kit. FYI The ends are made by Apex, so you can buy their setup too.
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #33
To the folks that asked via "conversation"... Yes, I have the stock front steel skid modified for my towbar and I use the factory steering stabilizer locations for my Fox 2.0 SS. (you cant see it, but its behind the tie rod)
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #34
FYI, Reid knuckles are due to arrive on Feb 24. Still awaiting the ball joints and RCV axles. I'll probably do those all together. Thanks for following. I'll update ASAP. A little bit of advise, check your vendors before ordering. It took me 3 months to get a refund from one. I ended up ordering from CJOffroad for my Borla 140828 exhaust. Argh!
Rangemaster
Well-Known Member
Well look what the man in brown just dropped off. Just got my power stop brake kit.
Sponsored
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #36
LOL. Those look like the same boxes I received. Although mine are K7942. Let us know if they're drilled and slotted.Well look what the man in brown just dropped off. Just got my power stop brake kit.
Rangemaster
Well-Known Member
Your kit is rear only, I bought the front and rear. I hope to install this weekend. From what I ordered they are suppose to be drilled and slotted.LOL. Those look like the same boxes I received. Although mine are K7942. Let us know if they're drilled and slotted.
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #38
Copy. I have the box for the fronts too somewhere. LOL
Rangemaster
Well-Known Member
Man your going all in, The only thing I need now the Reid knuckles. Got the ball joints, bump stops, apex tie rods and now the brakes. I am still on the hanger for the shafts. I might do a truss before I do the shafts.
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #40
They sell chromoly shafts for the front too if RCVs are not an option. (my RCVs are on backorder and I wont see them for about a month) I ordered the knuckles from Poly Performance. I got a 10% discount, they dont charge sales tax or delivery. Aren't trusses more for jumping and Baja racing? LOL
Last edited:
Sponsored
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #42
Still awaiting my RCV axles, but glad I got the Reid knuckles after seeing this video. LOL
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #43
I'm gonna keep moving forward and replace the the knuckles and ball joints this weekend being the RCVs still are on back order for a few more months. The good thing is my DSs were delivered today. I went with Adams 1350s.
OP
OP
19 JLUR Bright Whit3
Well-Known Member
- Thread starter
- #44
Done!
Still waiting on the RCVs. Argh!
Still waiting on the RCVs. Argh!
Headbarcode
Well-Known Member
- First Name
- Mike
- Joined
- Aug 16, 2018
- Threads
- 26
- Messages
- 7,755
- Reaction score
- 18,010
- Location
- LI, New York
- Vehicle(s)
- 2019 JLUR Stingray 2.0 turbo
- Vehicle Showcase
- 1
Does Adams replace the yoke on the axle? My front is currently the 1310 setup from Metalcloak. I just received the JE Reel 1350 rear shaft and it also replaces the axle yoke, so I had to get a beam style in/lb torque wrench with a dial to not over torque the pinion nut. I'll be swapping the front out for a matching JE Reel as soon as it shows up.
Sponsored
