Oracle Lighting 5874-504 Rear Bumper LED Reverse Lights

[DOUGCOGLEY]

Has anyone installed the Oracle Lighting 5874-504 Rear Bumper LED Reverse Lights onto a 2024 JLU?

Sponsored

 

[PolyFan]

Yes, fantastic product and experience. Easy enough if you don't have a tow package. If you do, I believe you need to remove your bumper to install... but well worth it. At the time I purchased 2 years ago, the Oracle tail lights (which also have great backup lights) were either not yet available or too expensive for me - but I've enjoyed the bumper reverse lights so much that I'm also installing the tail lights for Christmas this year.

 

[DOUGCOGLEY]

I guess its worth mentioning I have a 2024 Sahara that is loaded with all options.

 

[DWS44]

You might want to do a search, there are several good threads about these. If you have the factory steel bumpers, be advised that some folks have struggled with fitment issues on those.

 

[DOUGCOGLEY]

You might want to do a search, there are several good threads about these. If you have the factory steel bumpers, be advised that some folks have struggled with fitment issues on those.

I have a Sahara stock plastic bumpers.

 

[PolyFan]

Yes, fantastic product and experience. Easy enough if you don't have a tow package. If you do, I believe you need to remove your bumper to install... but well worth it. At the time I purchased 2 years ago, the Oracle tail lights (which also have great backup lights) were either not yet available or too expensive for me - but I've enjoyed the bumper reverse lights so much that I'm also installing the tail lights for Christmas this year.

...and I bought their pre-made pigtail wiring kit so I would not have any Stealership issues under warranty for splicing/tapping into the wiring. FYI

 

[CRZYCDN]

Same, great product, I put a small "bead" of silicon in the seam before installing on my 2024. As the the other set I had on my 2018 "leaked".
Yes the harness for the tail light makes it much easier.
PS don't force them in the steel bumper..I cracked a lenses. One side seems to be tighter than the other. I filed the side of the light (soft aluminum)

Sponsored