KC Chase rear light bar installed

[Steven7]

The wires for all tail light signals are behind the plastic wheel well cover on the passenger side of the cargo area.

Ok, Thanks for the information.

Sponsored

 

[BigMaCro]

Ok, Thanks for the information.

Wiring Diagrams at: https://www.jlwranglerforums.com/forum/threads/jeep-jl-wrangler-wiring-diagrams.19185/

If you have the trailer tow package, use those wires and that diagram. They're separate from the wires driving your taillights and so safer to play with. You'll find there are larger "1mm" wires for the tow package and smaller ones sharing some of the same color coding for the taillights.

 

[Steven7]

Work perfectly! Thanks for all.

 

[BigMaCro]

Work perfectly! Thanks for all.

Nice!

Be careful with rapid strobing, particularly of red, as that's reserved for official emergency vehicles.

 

[Frankycardenas]

Hey so I’m going to wire this to a switch panel 1 switch for power and maybe 3 diferente strobe modes and my trialer lights, my question is what if I’m on my disco mode function and I put my jeep in reverse or hit a turn signal or reverse? Do I need to turn of my strobe switch before I do turn signal or reverse?

 

[Steven7]

no need. your reserve light connection and turn signal light will on even you turn on the disco model.

 

[Frankycardenas]

no need. your reserve light connection and turn signal light will on even you turn on the disco model.

I guess I’m having bad luck, I got everything wired and every trigger wire just turns on the white lights, if I remove the module all the lights work,

 

[KC HiLiTES]

I guess I’m having bad luck, I got everything wired and every trigger wire just turns on the white lights, if I remove the module all the lights work,

I sent you a DM with my info so we can get this issue resolved.

Sponsored