JScan - TPMS Setting - What Am I Messing Up?

[Aussicon]

Running my tire pressures at 30 psi now. I usually have the PSI window open in the gauge cluster when driving. I got in to Adaptation and changed TPMS settings:
Light Load F/R: 0
Max Load F/R: 15
Yellow tire warning was still on, so I went back and changed Premium TPMS = Deactivated.
Now my psi window has gone, and the warning light is out.

The ranges I tried to set were for normal psi at 30 and allowing for deflation down to around 15 without setting any of the warnings off.

Is there a way to keep my psi gauge and not have the tire warning light on too?

Sponsored

 

[Aussicon]

Answered my own question:
Reactivated Premium TPMS and then found one Max Load setting had not stuck. Reset to 25 psi.
Hopefully has solved the problem.