Rhinebeck01
Well-Known Member
- Joined
- May 9, 2018
- Threads
- 155
- Messages
- 11,978
- Reaction score
- 17,305
- Location
- Multiple places..
- Vehicle(s)
- '18 JL Rubi, '22 Prevost M H3-45,'01 Harley FatBoy
.
I replied earlier and told you that you have an eTorque, JLU... and thus, no Auxiliary battery, you will have metal jumper between N1 and N2 and also no Aux battery negative cable attached the Main battery, neg terminal....
You can verify that you have eTorque, by looking over the factory build sheet for your JLU.
To see a copy of your JLU's build sheet:
Click on the link. Now, go up and add you Vin # to the URL and then press your Enter key again.
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=
.
@Rhadams1986I'm not, how would I be able to tell the difference.
I replied earlier and told you that you have an eTorque, JLU... and thus, no Auxiliary battery, you will have metal jumper between N1 and N2 and also no Aux battery negative cable attached the Main battery, neg terminal....
You can verify that you have eTorque, by looking over the factory build sheet for your JLU.
To see a copy of your JLU's build sheet:
Click on the link. Now, go up and add you Vin # to the URL and then press your Enter key again.
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=
.
Sponsored