How did you physically secure your Tazer module?

[Edslittleworld]

I put mine in a thick sock and zip-tied it to that metal cross brace below the steering wheel. Any better ideas?

Sponsored

 

[Rhinebeck01]

I mounted my ZAutomotive, bypass module with a 3D printed mount made by forum member @WilhelmSR.

The mount works well with/for the Tazer JL Mini and the Lite as well as the bypass module that ZAutomotive sells..

The mount secures with 2 zip ties. The Tazer JL Mini/Lite/Bypass module, easily slips into the mount.

When you want to remove the Tazer JL Mini/Lite/Bypass module, you just push on the little tab on the rear and it releases the goodie it houses..

What's extra nice about this particular mount is that it covers the port on the mount.

The mount is not visible after you re-install the plastic under the steering column.

 

[Rangemaster]

I put mine in a thick sock and zip-tied it to that metal cross brace below the steering wheel. Any better ideas?

Velcro, works great. On and Off and rattle free.

 

[Rhinebeck01]

Velcro, works great. On and Off and rattle free.

Yup, I used " VELCRO Brand Extreme Tape Strips | 4 x 2 Inch 2 Sets | Holds 15 lbs |Heavy Duty Black
for over 2 yrs.. Worked well...
https://www.amazon.com/gp/product/B00JJPPNHM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I have been using the same Extreme hold stuff to hold my digital readout gauges and my disconnect switch on my Main Battery for months now.. Has stood up to the heat and vibration well..

 

[lowmpg]

I put mine in a thick sock and zip-tied it to that metal cross brace below the steering wheel. Any better ideas?

Did mine the same way.

Sponsored