HELP - Removing main fuse?????

[AcesandEights]

nvm

Sponsored

 

[Terrymo]

nvm

What’s the fun in that?

 

[AcesandEights]

Actually, I was trying out some code and needed a quick place to drop it to see what it looked like before posting it somewhere else. I just used this thread to try it out. When I saw it worked, I cut it and just used nvm to up my post count j/k. I never read the original post (still haven't), so I'm not sure what this thread is about.

 

[Terrymo]

Actually, I was trying out some code and needed a quick place to drop it to see what it looked like before posting it somewhere else. I just used this thread to try it out. When I saw it worked, I cut it and just used nvm to up my post count j/k. I never read the original post (still haven't), so I'm not sure what this thread is about.

I was hoping for more of this
Generally salty and raw, with a dash of sarcasm. Usually served with a side of facetious.

 

[AcesandEights]

How about instead of j/k, f/u?

 

[Deleted User 38384]

How about instead of j/k, f/u?

I'm still trying to figure out what j/k stands for...

 

[Terrymo]

How about instead of j/k, f/u?

Well…ok…you‘re more clever than that but that’s not a bad universal come back

 

[Deleted User 38384]

Well…ok…you‘re more clever than that but that’s not a bad universal come back

 

[Terrymo]

I’m too antisocial for any of the social media platforms but I found it on YouTube. I’ll be stealing this line.

 

[THAW]

Link to Noco pics and some under hood wiring.
https://www.jlwranglerforums.com/fo...hood-wiring-organization.121069/#post-2521739

@Tredsdert

Here's where I installed my NOCO AC port (Powerwerx powerpole port is for solar):

Obviously, I need to get some of those black stainless bolts @Terrymo recommended in a different thread.

 

[1Roadking]

All the YouTube videos I see, these dudes just pick it up effortlessly with their fingernails, I'm sure before they took that cut they sat there and pried away at it for freaking 2 hours.

In all the videos and pictures I've seen of the N-fuse rail, it shows a couple of slots for tabs in the back of it, has anyone taken this thing off and can give me some pointers because I'm not trying to pry mine off, but I can't seem to get it off to replace it.

Is there a secret code for taking this thing off?

All the YouTube videos I see, these dudes just pick it up effortlessly with their fingernails, I'm sure before they took that cut they sat there and pried away at it for freaking 2 hours.

In all the videos and pictures I've seen of the N-fuse rail, it shows a couple of slots for tabs in the back of it, has anyone taken this thing off and can give me some pointers because I'm not trying to pry mine off, but I can't seem to get it off to replace it.

Is there a secret code for taking this thing off?

I was baffled at first too thinking it was bolted to the PDC. I looked at the video and saw that it’s just the metal piece that comes out. Slips up easily.

 

[ScotM]

I just put a zip tie under it and lifted it up

 

[Deleted User 38384]

I was baffled at first too thinking it was bolted to the PDC. I looked at the video and saw that it’s just the metal piece that comes out. Slips up easily.

Sadly mine did not come up so easily!

I just put a zip tie under it and lifted it up

Yeah, someone recommended the zip tie trick, and that ended up working best for me. On the EcoDiesels it's right up against the battery, so it's hard to get leverage on both sides at the same time. But the zip tie trick worked well for me!

 

[Terrymo]

I have that same specialty tool in my tool box

 

[Terrymo]

@Tredsdert

Here's where I installed my NOCO AC port (Powerwerx powerpole port is for solar):

Obviously, I need to get some of those black stainless bolts @Terrymo recommended in a different thread.

I keep a variety of 1/4-20 hardware on hand from here
https://www.albanycountyfasteners.c...NnjhzjepPRIqFtqsv0ZZD9L9PB_HdNTq2zzWZAcOinWAC

Sponsored