I did last evening. We'll see.Sounds like you need to reorder it then
This is 100% incorrect. Black is 12v+, white is 12v-, red is 12v+ trigger from brake switch, blue is 12v+ brakes (from controller)
No it should not be closed, it's up to Mopar to get a fix not anyone else. I paid for a working controller and I expect that. I want to see when Mopar/Jeep to come up with a fix.
2 Things...Had it installed at dealership. Same problems. No light on controller either.
1. Yup I will wait.
I got it installed now, I do not need it until April or May. I wanted to be on the fix list.
Thank you, got my non functional brake controller installed st the dealership. Had the 12volt relocated. Waiting for a fix now.Just sent in a note to Jeep Cares about the error code "Service Electronic Stability Control"...lets see how they reply.
I'm betting the OEM harness needs a diode but WHY would these idiots release a controller that obviously does not work properly, it's just beyond be. I intentionally waited for the release of the Mopar controller just because I didn't want to be jacking around with wires and diodes. Really pisses me off.
Additionally, this frigg'n controller should have been installed from the factory along with the tow package and not after the fact. The entire project is not for the shade tree mechanic or some poor sap dicking around in the garage drinking beer. Installation is no joke. Working with a shop light and a mirror under that dash most of the time and shoe horning myself under there to cut wire ties and mount the control was one of the most miserable jobs I've tackled for some time.
If I had to do it over I'd have the dealer do the install and then get on there ass when it threw the error code. Now I'm gonna have to deal with it.
On a lighter note, I was able to move the 12v auxiliary port. After serious planing, I really found only one place that works (at least for me). Attached is a photo.
So there you have it, If you plan on installing this controller yourself, be ready to go to battle.
Yes you will see the red light when you press the brake pedal at first startup. What Imeant was it won’t light up with the dash lights Without a trailer attached. Mine is dark at night too unless I hook up the trailer, then it’s lit like the rest of the dash.
Not getting the red light either anymore.
If you don’t have a trailer connected, You will only see that on the first brake press after the Jeep has sat for 15 or more minutes and the controller has gone to sleep. Make sure to read the operations card that came with it, they explain all of this pretty well on there.
