Hardwire radar detector in 2020

[cjmdwyer]

Trying to hardwire radar detector in 2020 Rubicon and the mirror does not look like my 2018 I had. Mirror is autodimming but now the 911 and assist buttons are in roof not on mirror stalk. Wire colors are different as well. There is a conector in the roof area for the 911 and assist but not sure if colors to use as there is no pink with yellow stripe. Anybody hardwired off the mirror on a 2020 yet???

Sponsored

 

[crbrenny]

I can try to look up a diagram tomorrow

 

[chris4prez]

2020 JLUR with same setup as you and I following the below and was able to set mine up.

https://www.jlwranglerforums.com/forum/threads/hard-wire-radar-detector.11899/page-2

As goin2drt said:

You jam in the end of the cord right where I circled. Right up against the pink wire and push down.in. Then do the same with the black.

I also further confirmed I was using the right wire by confirming with a voltage detector that I had the one showing voltage only while vehicle ignition on doing the same thing show here:

Skip Video to 10:50 mark

Sponsored