CavFab Crawler Series Full Width Rear Bumper

[CavFab_mfg]

CavFab JL/JLU Rear Full Width Predator Bumper​

The Full width predator bumper provides the most protection while maintain exceptional ground clearance and departure angles. The full width design eliminates the chance of damaged lower tub corners. 8 mounting points secure the bumper to the frame to give you a solid recovery point. Sleek high clearance design with a center cutout for carrying a larger tire.

• Designed, Engineered, Tested, and Built in the USA
• Constructed of 3/16" CNC Cut / Formed American Steel
• Fully welded and finished
• Bolt on design with 8 mounting points
• Included D Ring Shackle Mounts
• Ships Raw Steel
• Optional provisions for factory backup sensors

Our Crawler Series Full Width Rear Bumper retails for $649.99. Be sure to also take advantage of our JL Wrangler Forum Discount Code: JLForum

http://cavfab.com/Jeep-Wrangler-JLJLU-CrawlerSeries-Full-Width-Rear-Bumper_p_307.html

Shown below with our JL Gate Plate (Spare Delete) and our HD Hinged Tire Carrier

Sponsored

 

[JSFoster75]

How much was the discount? Just saw this post today and it's already expired...

 

[CavFab_mfg]

How much was the discount? Just saw this post today and it's already expired...

Completely missed that it was set as a 24 hour code. I have updated it now to last indefinitely. You should check it out, pretty nice discount

 

[JJSix]

Looks awesome! I was going to go with the Rusty's but I'm loving the look and the high angles on the corners, just placed my order!

 

[CavFab_mfg]

Looks awesome! I was going to go with the Rusty's but I'm loving the look and the high angles on the corners, just placed my order!

I saw your order come through. Thanks for your business!

 

[CavFab_mfg]

This is BIG!

We have now added the option for you to retain your factory backup sensors! No additional cost either! Currently we are about 4 weeks out on finishing this but once we finish the inclusion of the sensors we will keep them in stock.

Also, our Black Friday Blowout is LIVE!

Save 20% through the end of the week with code: Thanks20

 

[JJSix]

This is what it looks like on the back of my JLUR. The painting was pretty simple from the bare steal, the install was not as easy at hoped. Tried to get some install instructions through both PM and email but no luck contacting Cavfab. Finally decided to say screw it and try to work my way though. It went on decently well, had to take the hitch off first (mistake #1) but eventually figured it out. The bolts are a bear to get on only because of how hard they are to get to. Finally managed to get a U-joint and extension of just the right length to get them lined up but man it was a struggle. Other than that, love the bumper, its full coverage, good approach angles, and looks great, very pleased!

 

[Gorilla57]

Looks great. Mine is on its way and will get installed in the next few weeks.

 

[CavFab_mfg]

Looks great. Mine is on its way and will get installed in the next few weeks.

Lets see some photos!

 

[CavFab_mfg]

Couple of updates for you all. We had several folks ask if we could integrate backup sensor provisions. This took a bit of time, but we now offer this as an option at no additional cost.

Below are some additional photos submitted by @bertjl on Instagram showing a mock-up of the bumper with the backup sensor provisions.

 

[Gorilla57]

Lets see some photos!

Should get to see it today or tomorrow. Still at Doetsch Offroad getting final touches done.

 

[CavFab_mfg]

Should get to see it today or tomorrow. Still at Doetsch Offroad getting final touches done.

The guys at Doetsch are good people!

 

[ckuptz]

What size tire is the spare? Is that a factory tow hitch?

 

[Gorilla57]

Not the greatest pics, but it’s ON!!!! This thing is beefy, love the wrap around sides.

 

[JJSix]

Great look! The wrap-sides is also one of my favorite things about it, looks like a solid install.

Sponsored