Auto windows (Up & Down)

[fonzie]

OK, as promised. Here is a brief write-up of my adding one-touch up to my front windows.

1st, you need to obtain a module to help with this.I purchased the DEI 535T. I have used similar DEI modules with great success. This is their newest one and it works really well.

I removed the HVAC console. It just pops off so work your way around the edges and pull:

Next you remove the window switch control panel, there are two screws:

Next I tested the wires with a voltmeter:

My wire colors were as follows:
Driver Up: OG/GN
Driver Down: OG/W (thick wire)
Passenger Up: OG/BN
Passenger Down: OG/V

I only wired the Up switches because the Down switch is already one-touch.

Next I just followed the instructions for wiring the 535T. You have to splice the Jeep wires so be sure you cut with enough room to splice the wires back together in the future if need be. I zip tied the 535T module behind the glovebox.

I plsan to do the rear windows at a later date. This will require another 535T.

Here is a video of the final product:
https://www.supermotors.net/getfile/1139153/fullsize/video.mov

Sponsored

 

[the_webers_inc]

Have been thinking about getting a 1 day pass to Mopar Tech Authority again. It will probably be a couple of weeks before I have time, but if no one else provides diagrams before then, I'll see what I can find.

FYI - this is what I'm referring to: https://www.techauthority.com/en-us/products/TAUSER24HOUR

 

[fonzie]

Thanks!

 

[ArmyJeeper]

Have been thinking about getting a 1 day pass to Mopar Tech Authority again. It will probably be a couple of weeks before I have time, but if no one else provides diagrams before then, I'll see what I can find.

FYI - this is what I'm referring to: https://www.techauthority.com/en-us/products/TAUSER24HOUR

I agree all windows should be auto up/down...let me know if you figure it out.

 

[fonzie]

Well, I did get the auto up for the front working. I used a DEI 535T module. Plan to do the back soon but the circuitry is slightly different. I did go ol'skool and pulled out the voltmeter to figure out wires!

 

[ArmyJeeper]

Well, I did get the auto up for the front working. I used a DEI 535T module. Plan to do the back soon but the circuitry is slightly different. I did go ol'skool and pulled out the voltmeter to figure out wires!

Was it difficult to do? Can you share pictures? Where did you mount the module? Is there a module for all 4 windows?

 

[fonzie]

Not that bad. I completely planned to take pics and took one... LOL

I am not aware of one module for all 4 windows. I like DEI, so for that one it takes (2) modules. I mounted the one thus far behind the glove box. I'll take more pics when I do the rear windows!

 

[Khsonic03]

Not that bad. I completely planned to take pics and took one... LOL

I am not aware of one module for all 4 windows. I like DEI, so for that one it takes (2) modules. I mounted the one thus far behind the glove box. I'll take more pics when I do the rear windows!

Please do! Very interested in this. How do the modules interface with the factory security, BCM, etc? Can you program the factory fob to control them too?

 

[Man-of-methods]

Well, I did get the auto up for the front working. I used a DEI 535T module. Plan to do the back soon but the circuitry is slightly different. I did go ol'skool and pulled out the voltmeter to figure out wires!

So you modded your windows to auto up and you didn't do a write-up or post any pics of the mod?

You should be clubbed like a seal and left on the ice to suffer.

 

[fonzie]

lol, I know! I will add later, promise!

 

[aug0211]

lol, I know! I will add later, promise!

Our pitchforks are twitching!

 

[Sting_NC_USA]

Following...

 

[ar15rifle]

I'm curious about this as well.

 

[fonzie]

I'll post some info tonight & pics tonight!

Sponsored