All Aboard.....THE GRAVY TRAIN

4xnaz · May 1, 2019

wibornz said:
Frickin sweet build.

Frickin sweet pics of great off roading

Frickin sweet write up.

Are you likeing the LED sprip lights on the front fender?

I like all the red that you're doing. Need to add red diff covers or the Rancho Red diff skids.

Thank you very much!!

I love the American Adventure Lab high line fender light kit!!! You save a ton of money but just cutting the OEM fenders and adding this kit instead of purchasing new aftermarket fenders. Not only do they look awesome, but they're also super functional by the extra tire clearance they give.

4xnaz · May 12, 2019

Mother's Day weekend and I'm wrenching in the garage. At least I was productive. Added a Road Armor light bar mount with a 50" Rigid Industries Radiance light bar. I also have two Rigid D2 cubes for the lower A pillar mount but will add them next weekend. Everything was wired to the factory Auxiliary Switches, simple as can be.

Also installed a Diabolical Slipstream for some topless security. This thing is a tank...well built and quite, thanks to the provided foam strips.

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN IMG_20190512_092146_303

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN IMG_20190512_091612_046

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN IMG_20190512_091612_045

jlewissystem · May 12, 2019

Nice adds - get your rear bumper on yet?

4xnaz · May 12, 2019

jlewissystem said:
Nice adds - get your rear bumper on yet?

Picking it up tomorrow and will have pics up tomorrow evening. Already pre-wired the rear Rigid cubes for it, through the passenger side frame, to a factory Auxiliary Switch.

jlewissystem · May 12, 2019

4xnaz said:
Picking it up tomorrow and will have pics up tomorrow evening. Already pre-wired the rear Rigid cubes for it, through the passenger side frame, to a factory Auxiliary Switch.

Awesome! I want to copy you, so any pics/tips you can provide would be awesome!! :like:

Also - post some pics of the light bar output - looks BEEFY!

4xnaz · May 13, 2019

jlewissystem said:
Nice adds - get your rear bumper on yet?

Motobilt Crusher rear bumper added with Rigid Industries Midnight Edition cubes. Perfect fit and the added rear light output is much needed, check out the rear camera shot with only reverse lights vs Rigid Industries Midnight Edition cubes. I love the smoked lens because they dont look out of place in the rear bumper.

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN 0513192111~2

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN 0513192112_HDR~2

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN 0513192113_HDR~2

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN 0513192114~2

Jeep Wrangler JL All Aboard.....THE GRAVY TRAIN 20190513_222950

jlewissystem · May 14, 2019

Thanks for posting - that bumper looks GRRRREAT! LYTES look good too - nice output.

Chief_Dan · May 16, 2019

WOW!
That is the 1st rear bumper I've seen that I like. You're right about the smoked lenses, they look real good on the bumper & the light output looks real good too. Boy, I wish my MR2 would sell soon, I'm getting an itchy trigger finger, ready to order now. Especially seeing your build & off road pics!

:like:

4xnaz · May 16, 2019

Chief_Dan said:
WOW!
That is the 1st rear bumper I've seen that I like. You're right about the smoked lenses, they look real good on the bumper & the light output looks real good too. Boy, I wish my MR2 would sell soon, I'm getting an itchy trigger finger, ready to order now. Especially seeing your build & off road pics!

Awesome! Thank you!

4xnaz · May 22, 2019

Added a vent decal to support my homie over at Seven Slot Battalion. Check them out.

Also, removed one bump stop puck up front and stretched her out to check out for any contact issues. Only issue is minor contact from the pinch seam at the lower rear fenderwell on the tire. Some minor trimming will solve that. So, running 38s on a 3.5" lift, 3 bump stop pucks in the rear, 2 bump stop pucks in the front, minor trimming to the rear fenderwell, removed inner fender liners and doing a fender chop....good to go!