50" light bar

[Djeman2569]

I'm having trouble confirming if there are any 50" light bars that mount on top of the windshield or the rear lip. Obviously there are light bars but I'm guessing there's a problem with the mounts. No website displays a clear answer

Sponsored

 

[Tharris]

Cu

I'm having trouble confirming if there are any 50" light bars that mount on top of the windshield or the rear lip. Obviously there are light bars but I'm guessing there's a problem with the mounts. No website displays a clear answer

Currently (at least to my knowledge) there are no brackets that can accommodate an overhead light bar. I've seen some over the hood, but none over head.

 

[Tritonman]

DV8 Offroad LBJL-01 50" Light Bar Mounting Bracket

Wasn't sure i could link directly or not so i played it safe.

 

[Djeman2569]

DV8 Offroad LBJL-01 50" Light Bar Mounting Bracket

Wasn't sure i could link directly or not so i played it safe.

You are 100% correct! Wow, can't believe I couldn't find one. What's interesting is on their website it's not even under JL products.

Btw, called and confirmed that it does not block the front windshield from folding down.

 

[Hubtech]

Hammerhead has a 50" mount as well.

 

[Hubtech]

also... please dont do it

 

[Jltowhere]

There is a company on eBay listed some but they want like $200. I am getting a bracket on day as I used my light a lot when camping and such. eBay item 273382288828

 

[Thatdudeoverthere]

Hammerhead 50"
ZRoadz makes for just 52" Light Bar and also with multiple a-pillar pod lighting or side shooters

 

[Dethwalkin]

Anybody using either of these two products?

 

[motorcityaftermarket]

We build a tubular style light bar mount. It gives you options as to what size and type. Also, it keeps leaves, mud, moisture from getting trapped up against the body. All American made right here in Michigan. We have a couple lighting packages show below as well.

https://www.jlwranglerforums.com/forum/threads/new-jl-tubular-windshield-light-bar-mount.28811/

The M1 Tubular Windshield Light Bar Mount for the JL!

We're pleased to announce what quite possibly be the ONLY tubular windshield light bar mount on the market for the JL!

• Use tube clamps to mount any style or size lighting you please!
• Other light bar mounts trap mud, dirt, leaves, and help form rust!
• No Drill Install, Lease Friendly
• Lifetime warranty on structure, 5 year warranty on powder coat

Tubular Light Bar Mount - $339 Shipped
Tubular Light Bar Mount + 50" Light Bar - $729 Shipped*
Tubular Light Bar Mount + 50" Light Bar + 4" Pods - $989 Shipped*

• All prices includes powder coating and shipping
• *All lighting package prices include wiring harness, rgb controller, and tube clamps

Click here to learn more!

 

[Dethwalkin]

I went with DV8.
Just a heads up though, DV8 says you use the factory hard ware to mount up the brackets. That's not 100% true. One of the bottom two on each side will no longer be long enough. You are going to have to pick up a couple of them from Mopar ($10 CAD each) or where ever you choose to shop. Mopars part number is #6508953AA. M8 1.25
One other option is, if you have the Mopar third brake light relocation bracket then you can just swap out those two for two that you take out.

 

[4xnaz]

Road Armor has a mount that I'm using. I like that it replaces the factory cowl piece and doesn't just mount on top of it.

 

[Cutterwolf]

Road Armor has a mount that I'm using. I like that it replaces the factory cowl piece and doesn't just mount on top of it.

Hey Tim,
Did that come with a bar across the top as indicated by the arrow in the pic?

Thanks

 

[4xnaz]

Hey Tim,
Did that come with a bar across the top as indicated by the arrow in the pic?

Thanks

No it did not. It was 4 pieces total. 2 pieces that replace the OEM cowl piece on each side and then the 2 A Pillar pieces that bolt to each cowl piece.
The photo you have posted is the Rigid Adapt Array model.

 

[Cutterwolf]

No it did not. It was 4 pieces total. 2 pieces that replace the OEM cowl piece on each side and then the 2 A Pillar pieces that bolt to each cowl piece.
The photo you have posted is the Rigid Adapt Array model.

thanks!!

Sponsored