Roky
Well-Known Member
You used them on the rear springs?FWIW I used them on my Mopar lift.
Sponsored
You used them on the rear springs?FWIW I used them on my Mopar lift.
How have they been in the mopar lift? Any difference, problems?FWIW I used them on my Mopar lift.
YupYou used them on the rear springs?
My front springs are straight and everything else is fine too. Have done plenty of off road and road without problems.How have they been in the mopar lift? Any difference, problems?
Nice job!!Here is something I did for my Jeep. I didn't want my hardtop just hanging from the ceiling so I installed rails for the hoist system and built a shelf for the top to set on. The shelf also made a great place to hang the doors and park the mower and other necessities.
![]()
Damn, my garage should be that neat !Here is something I did for my Jeep. I didn't want my hardtop just hanging from the ceiling so I installed rails for the hoist system and built a shelf for the top to set on. The shelf also made a great place to hang the doors and park the mower and other necessities.
![]()
Has there been a comprehensive write up on one of the side threads which explains the tips and tricks of this install? I'm getting close to doing this mod. Thanks!I get now why you guys were complaining about that one PITA screw. I was determined to switch mine for the clear ones this evening so I went outside and started pulling things apart, with the instructional videos by my side. Well, Diode Dynamics didn’t include the extra one-time-use pop rivots they say in their video they do, so I thought I would be able to make it happen without removing that one. All was going well and I was getting ready to pull the final few screws out, but then hubs came out to “help” me and wound up taking over.We realized later that pulling most of the bracket screws out was totally unnecessary and the only one that REALLY mattered was the one that’s damn near impossible to get to. Anyhow, in trying to get the new side marker screwed back in, my dearest husband also wound up breaking the round clip on the marker light bracket. I think it’s because he kept trying to jam the ratchet in place to reach the bolt since it’s in such an inconvenient spot. Oh well. Everything still went back together just fine but it got too dark to do the other side so that will happen tomorrow morning. I do love the way it looks for a (relatively) simple mod!
![]()
![]()
There's a YouTube video by Shocker Racing that really helped me out, just watch the whole thing because I think he did the second one easier.Has there been a comprehensive write up on one of the side threads which explains the tips and tricks of this install? I'm getting close to doing this mod. Thanks!